cycloaliphatic


Also found in: Dictionary.

cycloaliphatic

[¦sī·klō·al·ə′fad·ik]
(organic chemistry)
Mentioned in ?
References in periodicals archive ?
On the basis of Types: - Amines o Aliphatic Amines o Cycloaliphatic Amines o Polyamides o Amidoamines o Others - Anhydrides - Others On the basis of the Applications: - Coatings - Wind Energy - Electrical & Electronics - Construction - Adhesives - Composites - Others On the basis of Region: - North America - Europe - Asia-Pacific - RoWRead the full report: http://www.
Amines - - Aliphatic amines - - Cycloaliphatic amines - - Polyamides - - Amidoamines - - Others - Anhydrides - Others
1] Cycloaliphatic epoxy resin weather resistant 4 Additive, [F.
16) As expected, copolymerization of 2-VOES with these cycloaliphatic vinyl ether monomers enabled the formation of crosslinked films with increased Tgs compared to the control film based on the homopolymer of 2-VOES.
Tenders are invited for LTCTs of 400/5 A ratio Outdoor Cycloaliphatic resin cast type with 0.
The cycloaliphatic polyamide of b/s(2-methyl-4-aminocyclohexyl)methane and C18 diacid was synthesized and shown to be a moldable amorphous polymer with lower density, increased flexibility, better chemical resistance and reduced clouding as compared to the corresponding polymer derived from dodecanedioic (C12) acid.
The epoxy resin is based on diglycidyl ether and bisphenol F chemistry, and the coating is cured with a cycloaliphatic amine.
Epoxy resin, diglycidyl ether of bisphenol A (DGEBA), and epoxy hardener F-206, a low viscosity modified cycloaliphatic amine curing agent, were provided by Bajak Paint Co.
It has been suggested that the piperylene monomer is particularly prone to dimerization by addition to a cycloaliphatic monomer prior to polymerization (ref.
They're a rich source of the cycloaliphatic and aromatic structures that make good materials after polymerisation.
A new semi-flexible, cycloaliphatic epoxy from Huntsman Advanced Materials, The Woodlands, Texas, is used to mold sheds for outdoor electrical insulators in medium- to high-voltage applications.
The copolyester consists of repeat units of one or more aliphatic dicarboxylic acids, one or more aromatic dicarboxylic acids selected from the group consisting of terephthaliic acid, isophthalic acid and phthalic acid, and a stoichiometric amount of a glycol component consisting of one or more glycols selected from the group consisting of aliphatic glycols and cycloaliphatic glycols.