degraded surface

degraded surface

An airfield surface covered with standing water, ice, or snow.
References in periodicals archive ?
The optical image and topology of degraded surface after the biological test were recorded by the aid of a Leica DMR optical microscope and a DME Scanner atomic force microscope (AFM) DS 95-50, respectively.
c]/P values are used in the analyses to represent degraded surface conditions, although high surface runoff contributions to the riparian zone are not exclusive to degraded hillslope conditions (see e.
rz] of 100 mm/h is used in the analyses to represent degraded surface conditions, although average infiltration rates in compacted soils, duplex soils, and wet clayey soils may be much lower than this.
Therefore, for a degraded surface, there are reasons why [T.
The degraded surface was found to partially relax on annealing at temperatures below either of these values of [T.
Interior finishes waterproofing plaster at a level below the plane of chemical pressure grouting to the connection of the waterproofing treatment of interior floors, with insulation complement spraying and system remediation plasters - Thermal treatment of vertical wall structures basement, in relation to the safeguarding of internal surface temperatures facade above and below ground - Changes to the structure of floor layers and connected with the restoration of the waterproofing layer to the system waterproofing vertical walls - Replacement of degraded surfaces hygienically plasters - Exchange of non-bearing brick wall 14/07/2015
Reasons included high machine price, slow machining speeds, high operating cost, micro-cracking that degraded surfaces of workpieces, limitations on workpiece size compared with conventional machining processes, limitations on workpiece taper, and lack of familiarity of the process by most manufacturing and design engineers.
The works consist in particular in - Spot repairs: interventions multifunctional robot (milling), resin injection, or partial lining (headlines laying);- Renovation by continuous liner (casing) collectors and connections and sealing connections of nozzles inside the collectors;- Replacement of pipes and tubing for break, sinking or directed forcing;- Rehabilitation of sight: treatment of injecting sealing resin and patching of degraded surfaces.
the work includes in - Spot repairs: interventions multifunction robot (milling), resin injection, or partial lining (laying headlines);- Renovation by continuous liner (casing) manifolds and connections and sealing penetrations of connections inside the collectors;- The pipe replacement by bursting and casing sinking or forcing headed;- Rehabilitation of eyes: treatment of sealing resin injection patching and degraded surfaces.