die

(redirected from die away)
Also found in: Dictionary, Thesaurus, Medical, Legal, Financial, Idioms.

die,

any of various devices used for drawing wire, and for blanking, bending, cutting, machine forging, and embossing. Dies used for striking, or stamping, coins and medals are cut in intaglio, one for the front, another for the back, of the coin. Such dies were used as early as c.800 B.C. in Greece. Diemaking, or diesinking, formerly entirely a hand process in which the graver (a cutting tool), riffler (a file), and chisel were employed, has been accelerated in modern times by the use of diemaking machines supplemented by hand finishing. A punch, or male die, is commonly made as the counterpart in relief of the original die, or matrix; both are preserved as models, and duplicates are made from them for working dies. Sheet metal or other material is blanked (cut) out, shaped, or embossed between the dies by power-operated levers or drop hammers, or by die-castingdie-casting,
process by which molten metal is forced by a plunger or compressed air into a metallic die and the pressure maintained until the metal has solidified. Die castings are accurate, are sharply outlined, have a good surface finish, and can be made in complicated designs.
..... Click the link for more information.
. The die used for drawing wire or extruding rods is made of hard metal with a hole or a series of progressively smaller holes through which the metal is forced. For making screws or threading pipe a hollow hard metal die with internal threading is used.

die

[]
(design engineering)
A tool or mold used to impart shapes to, or to form impressions on, materials such as metals and ceramics.
(electronics)
The tiny, sawed or otherwise machined piece of semiconductor material used in the construction of a transistor, diode, or other semiconductor device; plural is dice.
(medicine)
To pass from physical life.
(mining engineering)

die

die, 1
1. The middle portion of a pedestal between the base (or plinth) and the surbase; also called a dado.
2. A tool for cutting threads on pipe, screws, etc.

die

1. 
a. a shaped block of metal or other hard material used to cut or form metal in a drop forge, press, or similar device
b. a tool of metal, silicon carbide, or other hard material with a conical hole through which wires, rods, or tubes are drawn to reduce their diameter
2. an internally-threaded tool for cutting external threads
3. a casting mould giving accurate dimensions and a good surface to the object cast
4. Architect the dado of a pedestal, usually cubic

die

(jargon)
crash. Unlike crash, which is used primarily of hardware, this verb is used of both hardware and software.

See also go flatline, casters-up mode.

die

(electronics)
Plural: dies. An unpackaged integrated circuit.

die

An unpackaged, bare chip. A die is the formal term for the square of silicon containing an integrated circuit. Die is singular, and dice is plural. The terms die and chip are often used synonymously.


Dice on a Wafer
This picture of several dice on the wafer shows the various subsystems on each die (chip). This image is called a "beauty shot," because the different areas are colored for presentation. (Image courtesy of Texas Instruments, Inc.)
References in periodicals archive ?
Stevie Keith of city management company CV One said: "These are spring plants that die away in the summer but come back as bright as ever next spring.
Any showers tomorrow will be quite light and die away through the day.
AFTERMATH The aftermath is with me It will never die away I'll remember it forever The time, the place, the day You went to watch a football match To cheer, to sing and chant Then tragedy it struck you As you meet your sad lament The whole of Liverpool mourns you I know I won't forget Every time that Liverpool score a goal When it hits the back of the net You've gone to meet Bill Shankly He'll take care of you I know You'll be looking down and watching Every kick, every pass, every throw And when I see a red sky On an Anfield famous night I know that you'll be with me An eternal shining light.
Virtually every village and most churchyards have a memorial to their war dead, and it is inconceivable that the traditions of wreath-laying, respectful silence, prayers, the Last Post, Reveille and Flowers of the Forest will ever die away.
If you're planting them in a border, surround them with ornamental grasses which will hide the strappy leaves, which start to die away before the flowers bloom and can look a little tatty.