discharge opening

discharge opening

The opening at the base of a refuse chute through which the refuse drops into a refuse container or refuse compactor.
References in periodicals archive ?
The demolition material must pass through these openings to the discharge opening above the roof.
Featuring a 360[degrees] discharge opening, the unit distributes a homogeneous feed to cone crushers, keeping cones choke-fed for optimum efficiency, greater manganese wear life, improved production rates, and the consistent yield of a more cubicle product.
The F-Series, or Flared Series, Cage Mill from Stedman features a flared discharge opening, efficiently reducing the wettest and stickiest of materials, either abrasive or nonabrasive, without clogging.
Rex mixer; four-cylinder Continental Engine drum drive; old gasoline pump with nozzle to add water; and, hand-operated steel wheel on rear to operate discharge opening gate.
Suitable for handling water with small solids and light debris, Subaru semi-trash pumps offer a heavy-duty overhead cam gasoline engine, a large volute discharge opening and dependable performance.
The composition discharged from the discharge opening passes through the at least one static mixer.
Available docking stations can be used at the solids discharge opening to make this a fully contained system.
A massive 149-square-inch discharge opening more than doubles the industry standard to allow grass clippings to spread evenly in an eight-foot pattern without bunching or clumping.
The TrimTek deck uses counter-rotating downdraft blades to keep the clippings suspended longer, while a three-tiered discharge opening is designed to distribute clippings evenly.
Uses a high-performance Cedarapids 5048LP impact crusher with a large discharge opening and standard 3-bar or optional 4-bar configuration
As shown in Figure 19-2, the water enters at the center or eye of the impeller and passes outward through the rotor to the discharge opening.
With over a million pounds of crashing force, this crusher incorporates automatic fully adjustable positioning of the discharge opening for pre-programmed sizing of material.