drill sleeve

drill sleeve

[′dril ‚slēv]
(engineering)
A tapered, hollow steel shaft designed to fit the tapered shank of a cutting tool to adapt it to the drill press spindle.
References in periodicals archive ?
Abstract: Compensation of variable force performed by a spring can be compensated by a flat cam, for example by operating a drill sleeve.
The working prototype consists of a fixed magnet that is placed inside the intramedullary nail and a handheld unit housing the sensors, electronics, and drill sleeve.
The drilling part of drill bit unexposed by drill sleeve is measured as distance X mm.
Tenders are invited for Drill Sleeve Mt 4 - 5 , Inner Mt-4 Outer Mt -5, Make:-Turnmax, Kats, Unitek
Tenders are invited for Drill Sleeve Mt -3-4 Inner Mt - 3 Outer Mt- 4 , Make:- Turnmax , Kats, Unitek
Tenders are invited for Heavy Duty Pillar Type Drilling Machine, Capacity-40Mm, Geared Model With 8 Spindle Speeds Complete With All Standard Fittings Without Electricals 1 Drill Chuck, Size 13Mm, 2 Drill Sleeve 3-4 3 Drill Sleeve 3-2 4 , Drill Arbor Mt2 5 Belt And Fittings 6 Electric Motor 2Hp, 3Ph, 1440 Rpm
Quotations are invited for Supply Of Tap Wrench, Tap Sleeve, Drill Chuck, Drill Sleeve, Extension Socket And Drill Sleeve Extension At Beml,Kgf Complex
Tenders are invited for Supply of Drill Chuck, Drill Sleeve, Taper Shank Drill Bit, Carbide Tip etc.
Tenders are invited for Supply, inspection, testing, delivery and guarantee of surface plate, angle plates, v block, dial indicator with magnetic stand, high carbon steel drill sleeve, pipe centre and magnetic sine plate, granite surface plate,
INSTRUMENTATION: Different sizes of interlocking nails (ILN), guide-wire, guide-wire holder, Proximal zig, bone awl, two sets of drill sleeves, 3mm Steinmann pins, drill bits, Electric or hand drill, bonetap, 2mm, 2.
5Mm Schanz Screws For External Fixation Of Fractures Or For Percutaneous Drill Thru Drill Sleeves , Made Of High Tensile Strength Medical Grade Stainless Steel, 2 Flute, Length At Minimum Of 115Mm To Maximum Of 135 Mm , Blunt End Adapted For Fixation In A Jacob Chuck Of Bone Drills,Detailed Specifications Attached For Download
5Mm Cannulated Cancellous Screws For Fixation Of Fractures Or For Percutaneous Drill Thru Drill Sleeves Over Guide Wires, Guide Wires Of Appropriate Calibre And Length Compatible With Drill Bit To Be Supplied With Each Drill Bit @ Three Guide Wires With One Drill Bit, Made Of High Tensile Strength Medical Grade Stainless Steel, 4 Flute, Length At Minimum Of 130Mm To Maximum Of 160Mm , Blunt End Adapted For Fixation In A Quick Coupling Of Bone Drills, One Drill Bit Each Of 2.