drive pulley

drive pulley

[′drīv ‚pu̇l·ē]
(mechanical engineering)
The pulley that drives a conveyor belt.
References in periodicals archive ?
Tenders are invited for Replacement of gravimetric feeder belts ,replacement of head pulley bearings,coupling halves,studs,bronze and rubber bushes of main drive pulley coupling,opening and closing of rc feeder doors,replacement and overhauling of main reducer gear box and repairing of 22 inches coal pipes from classifier outlet gates to all corners of boiler of unit 1&2 as and when required during the year 2018-19
ASGCO has added Semi-Ceramic Pulley Lagging to its product portfolio, enabling it to offer customers a choice between full ceramic coverage with its Arrowhead Ceramic Pulley Lagging for high-tension drive pulleys, as well as partial (40% coverage) ceramic lagging for smaller pulleys, non-drive pulley's and bend pulleys.
And the company also deploys a drive system that's based on bearing cases located on each side of the drive pulley rather than the more-conventional belt-driven designs.
On the other hand, in the case of motorcycles with belt type C VTs, in the process of delivering driving force from the drive pulley to the driven pulley, the pulley ratio is continuously changed depending on the equilibrium between a thrust force applied to the drive pulley and that to the driven pulley, which is determined by a running resistance.
It slides the belt from the lineshaft from the idler pulley to the drive pulley of the cream separator, and then reverse shuts it down," their note says.
Polyurethane timing belts are positively driven because the toothed profile moulded directly into each belt, matches and engages directly with that of a toothed drive pulley.
However, logic dictates that a smaller-diameter drive pulley will have a much greater tendency to deflect as the conveyor width increases (a 1.
This new system enhances the durability of the drive belt and allows for a more compact design with a shorter distance between the drive pulley and driven pulley.
Completely enclosed stainless steel motor drive pulley ensures drip-proof, trouble-free operation
Ajusta-Bows are available in diameters up to 71/2 with a full range of cover compounds, pedestal or flange mounts, as well as an optional drive pulley.
The patent-pending design of the Arrowhead ceramic lagging is said to provide solutions to problems experienced with conveyor belt slippage around the drive pulley and severe wear problems on snub and bend pulleys.