external thread

external thread

[ek¦stərn·əl ′thred]
(design engineering)
A screw thread cut on an outside surface.

outside thread

A thread on the external surface of a pipe or cylinder.
References in periodicals archive ?
An S41 can even be equipped with two A-axis heads, meaning that rough grinding and thread grinding can be done in the same clamping, in addition to both internal and external thread grinding.
The end with an external thread is known as the male end, whereas the end with an internal thread is called the female end.
All of them have the external thread M12x1, used for the specimen clamping.
Al-Maliki said that "what happened today gives evidence that the matter was made with internal and external thread, and this is illegal and unconstitutional.
In our description of the system, for instance, all threads have the same material properties, but their impact on the dynamics of the antenna varies according to the spatial location of the threads: intuitively, an external thread induces a much larger torque than an internal one.
The housing and stem conform to DIN ISO 12 240-4, dimension series K and have a radial spherical plain bearing and a right or left hand internal or external thread.
is a new non-contact sensor range designed to check both internal and external thread presence for critical parts manufacture and automated assembly line applications.
Internal and external thread whirling can carry on simultaneously on many machines machine, producing complete thread inlets and outlets with no deteriorating threads in only one pass.
Designed for use in softwoods, as well as materials like MDF and plywood, Hex Drive Inserts feature a broad external thread for holding power in soft materials.
For smooth taps with no external thread on the outlet, you also need an inline adaptor at pounds 2 inc p&p.
An internal thread and an external thread with the same nominal size should screw together.
The ends are machined with either internal or external thread, or with external barb ridges on the models intended for crimp fit connections to hydraulic hoses.

Full browser ?