first coat

first coat

The initial application of plaster. In two-coat work it is called the base coat; in three-coat work it is called the scratch coat.
References in classic literature ?
But they met wolves fighting for all that made the Pack, and not only the short, high, deep-chested, white-tusked hunters of the Pack, but the anxious-eyed lahinis--the she-wolves of the lair, as the saying is--fighting for their litters, with here and there a yearling wolf, his first coat still half woolly, tugging and grappling by their sides.
Start with a base coat before applying a first coat polish, painting a line down the center and then sides of nail.
Next take your chosen varnish and thin the first coat with 10 per cent of white spirit to make it more workable.
Kids, like the students over at Chaminade Intermediate School in Chatsworth, who are learning a little about life on the other side of the tracks these days because of a wonderful program the school has been dedicated to since the first coat was handed out three years ago.
Using this technique, Berks applied the first coat of rubber about 1/8 in.
APV Engineered Coatings has introduced a new NeverFade Universal Primer for use as a first coat in conjunction with the application of NeverFade exterior paints.
To make their film, the Northwestern researchers first coat silicon with the fullerene.
Painting and paper hanging BA 3-4 (LV 08/2014) - 670 mA woodchip wallpaper,- 1,295 mA glass cloth- 1965 mA first coat walls,- 50 mA Epoxy Versieglung wall surfaces,- 925 mA ceiling first coat,- 65 mA first coat steel frames and doors.
1200 mA first coat plaster walls dispersion silicate,
by removing existing treatment ,sealing cracks by non shrinkfill compound applying first coat of polymer modified semi viscous paste prepared by mixing polymer of approved make (such as Master seal 550/ brush bond/ Roff Supercrete / Monobond/ perma shield/ /Master crete m 81 ) and Cement in 1:2 proportion (1 litre polymer : 2 Kg Cement ) or Rohnex water Proofing system in two coats(1kg powder,700 ml Water and polymer jelly for first coat &.
As the stain block forms a seal, the first coat of emulsion will take a while to dry.
Full browser ?