load (redirected from get a load on)

load

(1) To copy a program from some source, such as the hard disk or CD-ROM, into memory for execution. In the early days, programs were loaded first and then run. Today, when referring to applications, loading implies load and run. Thus, "load" the program, "run" the program and "launch" the program mean the same thing.

Many people also use the term to refer to installing an application, so "load the program" may mean "install the program."

(2) To fill up a disk with data or programs.

(3) To insert a disk or tape into a drive.

(4) In programming, to store data in a register.

(5) In performance measurement, the current use of a system as a percentage of total capacity.

(6) In electronics, the flow of current through a circuit.

(7) In a network, the volume of traffic.

---

load

1. the weight that is carried by a structure

2. Electrical engineering Electronics

a. a device that receives or dissipates the power from an amplifier, oscillator, generator, or some other source of signals

b. the power delivered by a machine, generator, circuit, etc.

3. the force acting on a component in a mechanism or structure

4. the resistance overcome by an engine or motor when it is driving a machine, etc.

5. an external force applied to a component or mechanism

---

load [lōd]

(computer science)

To place data into an internal register under program control.

To place a program from external storage into central memory under operator (or program) control, particularly when loading the first program into an otherwise empty computer.

An instruction, or operator control button, which causes the computer to initiate the load action.

The amount of work scheduled on a computer system, usually expressed in hours of work.

(electricity)

A device that consumes electric power.

The amount of electric power that is drawn from a power line, generator, or other power source.

The material to be heated by an induction heater or dielectric heater. Also known as work.

(electronics)

The device that receives the useful signal output of an amplifier, oscillator, or other signal source.

(engineering)

To place ammunition in a gun, bombs on an airplane, explosives in a missile or borehole, fuel in a fuel tank, cargo or passengers into a vehicle, and the like.

The quantity of gas delivered or required at any particular point on a gas supply system; develops primarily at gas-consuming equipment.

(mechanics)

The weight that is supported by a structure.

Mechanical force that is applied to a body.

The burden placed on any machine, measured by units such as horsepower, kilowatts, or tons.

(mining engineering)

Unit of weight of ore used in the South African diamond mines; equal to 1600 pounds (725 kilograms); the equivalent of about 16 cubic feet (0.453 cubic meter) of broken ore.

---

1.		load - To copy data (often program code to be run) into memory, possibly parsing it somehow in the process. E.g. "WordPerfect can't load this RTF file - are you sure it didn't get corrupted in the download?" Opposite of save.
2.		load - The degree to which a computer, network, or other resource is used, sometimes expressed as a percentage of the maximum available. E.g. "What kind of CPU load does that program give?", "The network's constantly running at 100% load". Sometimes used, by extension, to mean "to increase the level of use of a resource". E.g. "Loading a spreadsheet really loads the CPU". See also: load balancing.
3.		load - To install a piece of software onto a system. E.g. "The computer guy is gonna come load Excel on my laptop for me". This usage is widely considered to be incorrect.