hold time

hold time

[′hōl ‚tīm]
(metallurgy)
In resistance welding, the time that pressure is applied to the electrodes after the welding current is cut off.
References in periodicals archive ?
Cut the runner off if it has a cold runner and label both runner and part with the hold time.
12, 2014 /PRNewswire/ -- Fonolo, the company that improves the call center experience by replacing hold time with a call-back, continues to build momentum by expanding its portfolio of call-back solutions and developing strategic partnerships with industry leaders, including Avaya and Twilio.
Figure 4 shows the force versus time data for temperatures of 92-142 [degrees] C with a hold time of 180 sec.
Parts of a proposed Federal Reserve regulation that would require credit unions to reduce the hold time on certain checks could increase the incidents of fraud and threaten safety and soundness, according to letters from CUNA, NAFCU and several credit unions.
27 percent thought their hold time exceeded five minutes.
Some of the papers presented covered such topics as: thermochemistry of nodulization and inoculation of irons; nucleation mechanisms in ductile iron; a new approach to graphite nucleation mechanism in gray irons; and a study of hold time and fade effects on microstructure in ductile iron.
Aspects of resolution, cooling and hold time, count rates as well as vibrations are considered.
Pertinent Data: The Solutions Series are equipped with standard integrated controls, 2000 W of available output power, variable output amplitude control, automatic frequency control adjusts, digital adjustable controls for weld time, hold time, delay time, .
In some initial research, presented earlier this year at DATE, Roychowdhury's team demonstrated the basic approach, an alternative to the widely used binary search technique, which resulted in a factor of up to 10X speed increase, shortening the time required for calculating the set up or hold time from three months to a couple of weeks.
A second or so is added to the lowest value of time where the part weight stays constant, and this number is taken as the total time for the setting of hold time.
TORONTO, March 4, 2014 /PRNewswire/ -- Fonolo, the company that improves the call center experience by replacing hold time with a call-back, continues to grow its portfolio of world-class partnerships with the addition of Nationstar Mortgage.
Each step includes a heating rate, target temperature, hold time and maximum sinter temperature deviation.