radiator(redirected from infrared radiator)
Also found in: Dictionary, Thesaurus, Medical.
radiator,device used to heat an area surrounding it or to cool a fluid circulating within it. The familiar radiators of steam and hot water heating systems in buildings are misnamed, as they operate principally by convectionconvection,
mode of heat transfer in fluids (liquids and gases). Convection depends on the fact that, in general, fluids expand when heated and thus undergo a decrease in density (since a given volume of the fluid contains less matter at a higher temperature than at the
..... Click the link for more information. , in which heat is transferred by air currents, rather than by radiationradiation
, term applied to the emission and transmission of energy through space or through a material medium and also to the radiated energy itself. In its widest sense the term includes electromagnetic, acoustic, and particle radiation, and all forms of ionizing radiation.
..... Click the link for more information. , in which heat is transferred by waves that do not need air (or any other substance) as a medium for their transmission. Typically they are made of cast iron or of steel, aluminum, or copper. They are usually constructed in sections so that several can be joined together to give a sufficient surface area for efficient heat transfer. Heating efficiency is reduced if screens or shelves or even certain kinds of paint cover them. When steam is the heating agent, the radiator acts as a condenser; heat is given off at the rate of about .5 calories per gram of steam for each degree centigrade decrease in temperature and 540 calories for each gram of steam that changes to water (see vaporizationvaporization,
change of a liquid or solid substance to a gas or vapor. There is fundamentally no difference between the terms gas and vapor, but gas is used commonly to describe a substance that appears in the gaseous state under standard conditions of pressure and
..... Click the link for more information. ). The condensate is returned to the boiler where it is reheated to form steam. In hot water systems there is a continuous circulation of hot water. The heat is given off by the hot water or steam to the inner wall of the radiator, from which it is transmitted to the outer wall by conductionconduction,
transfer of heat or electricity through a substance, resulting from a difference in temperature between different parts of the substance, in the case of heat, or from a difference in electric potential, in the case of electricity.
..... Click the link for more information. ; there it passes off chiefly by convection currents set up by raising the temperature of the air that is in contact with the heated surfaces and to a lesser extent by radiation. Coil radiators consist essentially of long steam pipes; they are used widely in factories, gymnasiums, auditoriums, and halls, being set on the walls or ceilings to conserve floor space. Gas radiators use a gas flame to heat air or water or to generate steam. Electric radiators have an electric resistance unit set in a reflector; heat is generated when an electric current flows through the unit. An appreciable fraction of this heat is transferred from the radiator by radiation. The automobile radiator is a part of the cooling system of the automobile engine. As its operation depends on a flow of air across it, it operates mainly by convection.
one of the most common heating devices used in heating systems for residential, public, and industrial buildings.
The radiators most commonly used in the USSR are made of cast iron and consist of interconnected two-channel core sections through which the heat-transfer agent (water or steam) circulates; the number of sections depends on the rated heating surface. Other types of cast-iron radiators used include single-channel radiators in the USSR and, in other countries, multichannel radiators, with up to nine channels in each section. Single or paired stamped steel radiators of the panel type, also called heating panels, are becoming popular; considerably less metal is consumed in their manufacture. Porcelain and ceramic radiators, which meet very high sanitary and health requirements, are sometimes used.
a device for removing heat from the liquid that circulates through the cooling system of an internal-combustion engine. A radiator consists of a core (the cooling part), with upper and lower headers (reservoirs) and connecting pipes. Radiator cores may have several staggered rows of oval brass tubes, with cooling fins soldered to the tubes, or one row of flat brass tubes with fins soldered to them. The upper header has a filler neck with a leakproof cap containing a combined pressure and vacuum relief valve. There is a valve in the lower header for draining the coolant.
Any of numerous devices, units, or surfaces that emit heat, mainly by radiation, to objects in the space in which they are installed. Because their heating is usually radiant, radiators are of necessity exposed to view. They often also heat by conduction to the adjacent thermally circulated air.
Radiators are usually classified as cast-iron (or steel) or nonferrous. They may be directly fired by wood, coal, charcoal, oil, or gas (such as stoves, ranges, and unit space heaters). The heating medium may be steam, derived from a steam boiler, or hot water, derived from a water heater, circulated through the heat-emitting units.