intermesh

(redirected from intermeshing)
Also found in: Dictionary.

intermesh

[¦in·tər¦mesh]
(engineering)
References in periodicals archive ?
The world agrees with the front-loading of trade and the resultant intermeshing of national interests as a solvent of the core issue of Kashmir, it further said.
Recently, Wilczynski and White (33) have performed an extensive experimental study on melting in intermeshing counter-rotating twin screw extruders.
Tenders are invited for Providing Electrical Service Connection To Habitech Nivara Tantra Compacted Intermeshing Block Hydraulic System Plant Near Rear Gate At Ashiana Dehradun
The ZSE-27 MAXX co-rotating, intermeshing twin screw extruder features 52/1 L/D with modular barrels and segmented screws; 1.
Process fluid enters the center of the generator and accelerates outward through channels in the intermeshing teeth of the rotor/stator.
The flow of polymer melts in intermeshing counter-rotating twin screw extruder (Fig.
The company will feature its TEM Series of co-rotating, intermeshing twin-screw extruders, which offer "the highest torque per free volume and highest screw speed of any commercially available system," NFM says.
The chopper is equipped with 126 fixed-blade rotating knives with 41 adjustable intermeshing counter knives to provide a tailored chop performance in any straw condition, meeting no-till residue management spreading requirements globally.
The intermeshing twin screws in the discharge section also morph into two slightly smaller single screws.
As material travels from the center to the periphery of the discs at high speed, it passes through a path of five intermeshing rows of discs rotating and stationary impactor pins, with the desired tight particle size distribution obtained by controlling the rotor speed.
High-performance tangential and intermeshing rotor technologies form the foundation of the company's versatile mixing capabilities engineered to optimize compound dispersion and uniformity.
As material travels from the center to the periphery of the discs at high speed, it passes through a path of five intermeshing rows of rotating and stationary pins, with the desired tight particle size distribution obtained by controlling the rotor speed.