isolation test

isolation test

[‚ī·sə′lā·shən ‚test]
(engineering)
A leak detection method which isolates the evacuated system from the pump, followed by observation of the rate of pressure rise.
Mentioned in ?
References in periodicals archive ?
Furthermore, in order to assess their reaction and stress, the isolation test which can be applied experimentally has been used to determine behavior and heart rate (HR) in animals for decades [11].
However, the Tax Test, the Incidental Test, and the Isolation Test all do apply.
The 520-day isolation test is the last and core part of the Mars500 experiment that began back in 2007.
If you get a 220/001 shelter fault isolation test failure when you try to print AN/TPQ-36(V)8 Firefinder output, check to see if the printer has jammed or is out of paper.
Whether cellular/PCS, GSM, RFID, Bluetooth[R], or the growing family of wireless LAN access point and test products, it is certain that RF-safe and interference-free isolation test chambers will be required not only for design and development but also for product testing.
Isolation test voltages are specified at values up to 5300[V.
The test platform utilizes Benetel's unique high isolation test fixturing which facilitates consistent over the air (OTA) testing in any production environment.
Devices in the SMD-6 and DIP-6 packages offer high isolation test voltage of 5300 V / 1 min, while devices in the smaller SOP-4 offer isolation test voltages of 3750 V / 1 min.
The closely coupled architecture provides fast test execution yielding lower test costs while optimizing critical MIMO testing challenges such as full Tx and Rx manufacturing test in MIMO mode, Tx and Rx isolation test, Rx sensitivity test, and highly accurate EVM.
Aberdeen Group also audited an isolation test to prove the integrity of the test environment and a series of ad hoc tests designed to demonstrate SunriseXA's ability to operate on a broad range of client PC machines, including low-end 800 MHz machines with limited memory.
5Mbits/s over temperature), isolation test voltage of 2500 VACRMS for 1 min.