isolation transformer


Also found in: Wikipedia.

isolation transformer

[‚ī·sə′lā·shən tranz′fȯr·mər]
(electricity)
A transformer inserted in a system to separate one section of the system from undesired influences of other sections.

isolation transformer

In an electrical system, a transformer that prevents one section of the system from undesirably influencing another section.
Mentioned in ?
References in periodicals archive ?
0 requirements, Maxim partnered with Wurth Electronics Midcom to customize a power isolation transformer that is energy efficient and compact enough to fit in Maxim's credit-card sized Micro PLC form factor.
It is having the inbuilt isolation transformer at inverter output.
The manufacturer adds that the new medium-intensity LED runway edge light was designed to reduce the load on airports' constant current regulators (CCRs); can use an existing L-830 isolation transformer, and be powered by any existing CCR architecture type.
Depending on the customer's preference or existing installation, the drive can be used with an input isolation transformer or it can be directly connected to the line supply (direct-to-line).
An isolation transformer uses this technology to prevent current from flowing directly from one side of a circuit to the other.
The front panel of the 5510 has a power switch that controls the switched AC outlets of the unit: four isolation transformer outlets and two high-current outlets.
1 medical safety standards of excellence, the IS1000HG is a hospital-grade isolation transformer designed to meet low leakage requirements to protect healthcare equipment in patient care areas and critical medical applications, including telemedicine solutions, e-charting medical records and fetal monitoring software computers.
Specifically designed to eliminate the noise and hum caused by unbalanced AC power lines, the BP30 power system is built around a balanced and shielded isolation transformer design.
Eliminating the need for dedicated computer-grade AC power sources, the SRT isolation transformer filters out line noise and spikes from "dirty" current.
Both cameras feature digital signal processing, a 10-bit analog-to-digital converter, 50 dB signal-to-noise ratio, 1-lux light sensitivity, programmable motion detection, line lock, and built-in antiground loop isolation transformer.
8kV grid connection without the use of a 60Hz isolation transformer.
Tenders are invited for Supply Of Isolation Transformer 1120:470 As Per Specification No.