jig

(redirected from jigs)
Also found in: Dictionary, Thesaurus, Medical, Financial, Acronyms, Idioms.
Related to jigs: JEGS, Jigsaw puzzles

jig,

dance of English origin that is performed also in Ireland and Scotland. It is usually a lively dance, performed by one or more persons, with quick and irregular steps. When the jig was introduced to the United States, it was often danced in minstrel shows. In instrumental music the gigue, the successor to the jig, was used by Bach and Handel in their suites.

Jig

 

in machine building, a type of machine tool attachment used during the machining of holes on a drilling machine. The part being worked is located in or under the jig. Jig guide bushings determine the position of the cutting tool relative to the jig body and, consequently, relative to the part to be machined. The position of the hole axis of each bushing matches the position of the hole axis in the part, and the bushing hole diameter corresponds to the tool diameter. The use of a jig eliminates the marking operation, permits simultaneous machining of two or more holes, and increases labor productivity. The jig design depends on the dimensions, number, and positioning of holes and on the form and use (purpose) of the part. Parts and basic jig assemblies are standardized on a large scale in order to reduce jig manufacturing costs.

jig

[jig]
(engineering)
A machine for dyeing piece goods by moving the cloth at full width (open width) through the dye liquor on rollers.
(mechanical engineering)
A device used to position and hold parts for machining operations and to guide the cutting tool.
(mining engineering)
A vibrating device in which coal is cleaned and ore is concentrated in water.

jig

A device for guiding or holding a part or parts in correct mechanical alignment, either in the process of fabrication or in the final assembly of the parts.

jig

1. any of several old rustic kicking and leaping dances
2. a piece of music composed for or in the rhythm of this dance, usually in six-eight time
3. a mechanical device designed to hold and locate a component during machining and to guide the cutting tool
4. Angling any of various spinning lures that wobble when drawn through the water
References in periodicals archive ?
Now rotate the jig swingarm so it parallels the jig base.
After I had routed the outside of each end ring, the inner hole was routed with the piece in a jig that clamped the ring's outer circumference.
While jigging hasn't helped me ice a lot of pike, I have taken enough to allot one jig pole for just pike.
Pitching 1 /16- to 1 /8-ounce jigs tipped with a white twistertail or small Berkley PowerBait Ripple Shad is deadly.
Caption: Bladed jig, with metal plate at head and soft bait trailer, is a good search bait.
Kolinski dances his jigs to a couple of different steps.
These jigs deal effectively and efficiently with both fine and coarse material, achieving recoveries of better than 95% for coarse materials and 90% for fine materials.
The heyday of the use of modern jigs was from early in the 20th century through World War II.
And be certain that jigs and lures are attached low and to the side of the reel, not on a guide higher up, so that if one of those big treble hooks do get loose it won't catch a passer-by in the face, which hurts a whole lot more than being hooked in the leg.
Each of the two movable test heads located at the top and bottom of the M504 is equipped with a test jig for full-contact open short testing of double-sided FPCs.
I was at a sportshow in Massachusetts in 2003 and handed Evers some hair jigs.