male thread


Also found in: Dictionary.
Related to male thread: internal thread

male thread

1. A thread on the outside of a pipe.
2. Same as external thread.
References in periodicals archive ?
The crests of the standard male thread form are then drawn tightly against the wedge ramp, eliminating radial clearances and creating a continuous spiral line contact along the entire length of the thread engagement.
As a result, the subsequent male threads "float" within the female threads.
When joining NPT-threaded connections, it is imperative to apply lubricant or a sealant with a lubricating agent on the male threads to prevent damage.
Moreover, common stripping or shearing problems can occur when conventional 60-degree V-threads position the majority of the clamp load on the first engaged thread, permitting subsequent male threads to float within the female threads.
16 Stop Cock brass 20mm (3/4 ) dia, male thread, ISI Marked Nos 37
Tenders are invited for 1620 20Mm Male Thread Connector Make : Kitec Or Vista Or Similar Specn : Is 450
Tenders are invited for 2025 25Mm Male Thread Connector Specn 15450 Make : Kitec Or Vista Or Similar.
Tenders are invited for 1620 Mm X 1/2 Inch Male Thread Connector Suitable To 1620 Pe-Al-Pe Composite Pressure Pipe To Is - 15450 Isi Marked
Tenders are invited for 1216 Mm X 1/2 Inch Male Thread Connector Suitable To 1216 Pe-Al-Pe Composite Pressure Pipe To Is 15450 Isi Marked
Tenders are invited for Ptmt Stop Cock 15Mm Male Thread Make:Prayag Or Water Tec Cat No.
Tenders are invited for Heavey Duty Air Cylidner To Size 6 Inches Bore 10 Inch Storke, 1 3/8 Inches Rod Dia, Both Ends Cushioned, Cap Fixed Clevis Mount, Rod End Short Male Thread To Size 1 Inch To 14 Tpi,Pistion And Gland Seals Shall Be Of Viton Material And It Shall Be Interchangeble With M/S.