6] D 1400/760 M-134 Flux Foundry Other Samples obtained ZE41A A Refined using Mg-Zr Fracture bars, Tensile bars master alloy
, Ladle poured B Refined using Mg-Zr Fracture bars master alloy
, Ladle poured C 100% remelted metal, Fracture bars, Tensile bars Refined using Mg-Zr master alloy
, Ladle poured AZ91D A Ladle poured Fracture bars, Tensile bars B Degassed using degassing Fracture bars, Tensile bars tablet, Ladle poured D 100% virgin metal, Fracture bars, Tensile bars Refined and degassed using [C.
The bulk samples of a particular aluminium master alloy
for re-melting process was chosen by two different methods and evaluated for % recovery of the target element.
Electron beam melting can also be used to produce ingots of complexly alloyed titanium alloys by remelting the primary charge in the form of titanium sponge and master alloy
The first step to get nanocrystalline alloys was to obtain a master alloy
in form of bars, with an optimal chemical composition.
The key to LCB's lower cost (about 60 percent less in finished-wire form than Beta-C) is its use of an iron-molybdenum (ferromoly) master alloy
Molders say there is ready availability only of pure iron and nickel powders for both the elemental building and master alloy
approaches, but there are still shortages of fully formulated stainless- or tool-steel powders (or other complex alloys) for the prealloy approach, which most molders would greatly prefer.
Tenders are invited for Phospher Copper Master Alloy
For strontium additions, Al-10%Sr master alloy
The products and services offered to steel mill, forging, foundry, machine shop and OEM segments are mainlyl copper moulds, steel forgings, ingots and billets, master alloy
ingots and billets, certified scrap, alloy tube and bar, grinding belts and abrasive products, machining and fabricating.
It was shown in  that chamber electroslag remelting as the metallurgical process makes it possible, by additional alloying with an oxygen-containing master alloy
, to introduce the required concentration of oxygen into titanium and ensure chemical homogeneity of the metal of the ingot.
Ingot plants produce a wide variety of copper and copper alloy and master alloy
ingot for foundry, brass mill and other industry consumption.
The MOU was signed after several days of meetings in Almaty, Kazakhstan between IBC, Kazatomprom and Ulba Metallurgical Plant ("Ulba"), the world's largest beryllium and master alloy
processing facility and a wholly owned subsidiary of Kazatomprom.