maximum mass

maximum mass

Maximum certificated takeoff mass (ICAO).
References in periodicals archive ?
1 of the Tax Code of the Russian Federation for physical persons - owners of vehicles having an authorized maximum mass exceeding 12 tonnes registered in the Plato system.
The runway meets international requirements and is capable of accepting aircraft with a maximum mass of up to 180 tons.
This puts it in the "stellar-mass black hole" category, which are stars that exceeds the maximum mass allowance of a neutron star, but are smaller than supermassive black holes (SMBHs) - which exist at the centres of most galaxies.
According to the National Institute of Neurological Disorders and Stroke (National Institute of Health), "After the brain completes growth and attains its maximum mass at around age 25, it gradually loses mass with each decade of life, although the rate of loss is comparatively tiny until the age of 60, when approximately .
It will be based on a distance traveled for transportation vehicles with a total technically permissible maximum mass over 3,5 tons and time based on passenger cars with a total technically permissible maximum mass of up to 3,5 tons.
Maximum mass of the small intestine appeared in the F12h group, which returned to the control level after re-feeding 48 h (Table II).
It is observed that R134a exhibits maximum mass flow rate as compared to other refrigerants in the present comparison.
e], the maximum mass of such organism is limited to 59 tons (with roughly at j = 11).
The maximum mass concentration of non-functional surfactant in the composition of the synthetic wastewater (MN[K.
The curve obtained for pure EVOH shows two main peaks, which can be attributed to the maximum mass loss rate of poly vinyl alcohol (PVOH) and ethylene components, respectively (19).
In addition, integrated external shock absorbers increase the maximum mass moment of inertia by up to four times compared with previous technologies.
The temperatures of starting thermal decomposition and maximum mass loss, influencing mainly the ignition temperatures of the studied materials vary slightly, which indicates that the variable heating rate of polyester material based on Polimal 1033 APy at the beginning of the 1st phase of fire, does not influence the rate of forming the fire environment.

Full browser ?