mean power

mean power

[′mēn ′pau̇·ər]
(electronics)
For a radio transmitter, the power supplied to the antenna transmission line by a transmitter during normal operation, averaged over a time sufficiently long compared with the period of the lowest frequency encountered in the modulation; a time of 1/10 second during which the mean power is greatest will be selected normally.
References in periodicals archive ?
His generation wouldn't like the 1970s but the depletion of resources could mean power cuts again.
This result is confirmed by the Table 1 where the energy and the mean power of the IMF1 are most important compared to those of IMF2 and IMF3.
The mean power developed on a one leg 6 seconds sprint (W) on a calibrated nonmotorized treadmill (Woodway Force 3.
Tenders are invited for Contract covers small-scale (the "VZMR") the delivery of goods, which for purposes of this VZMR mean power tools, cordless tools kit, multimeter, and other industrial hoover workshop needs, as further specified in this task VZMR.
The balance stability was measured by computing the area, the sway path, and the root mean square of the COP motion, whereas the structure of the postural control was assessed by computed approximate entropy, fractal dimension, and the mean power frequency.
Anaerobic power performance as measured by Wingate test was used to represent anaerobic peak power, anaerobic peak power/kg, anaerobic mean power, and anaerobic mean power/kg.
AMBITIONS Brexit would mean power grab led by Johnson, says Sturgeon
This will mean power interruption of lines whether transient or permanent, causing brownouts or blackouts among Mindanao power customers and industrial customers to suffer production losses due to power outages and voltage dips, the NGCP said.
TEHRAN (FNA)- Iranian President Hassan Rouhani rapped Saudi Arabia and other countries which have collaborated with Riyadh in waging military strikes against Yemen, and said killing Yemeni women and children is no source of honor and does not mean power.
The PX8000 has built-in-functions for the direct calculation of derived parameters, such as root mean square (RMS) and mean power values, to enable the identification of cycle-by-cycle trends.
This doesn't mean power plants and petrochemical plants will have to shut down.

Full browser ?