mixing time

mixing time

The period of time during which the constituents of a batch of concrete are mixed in a fixer.
References in periodicals archive ?
Harmonite is said to be a versatile, multi-functional, operation-friendly base compound or performance additive that can improve current formulations by increasing tack, viscosity, hardness, durability and shortening cure times, depending on the application; reduce or eliminate the consumption of higher cost formulation ingredients such as plasticizers, tackifier resins, aromatic oils, titanium dioxide, powdered coal, hard clay, petroleum pitch and Gilsonite; and dramatically reduce mixing time, up to 50% in some cases, with up to 36% lower power consumption during production, according to the company.
Conditions 4, 5, 7, 8, and 9 have no torque peak due to crosslinking reaction because the mixing time was too short.
Long and colleagues show that the mixing time of the Swendsen-Wang dynamics Markov chain is theta(1) in high temperatures, theta(log n) in low temperatures, and theta(n1/4) at criticality.
Each ingredient addition and each step in the mix, drain and clean cycles are pre-programmed so that mixer speed, mixing time, temperature set-point, composition and batch weight are accurately replicated and recorded in every run.
Therefore, the result concluded that the optimum mixing time is 30 min.
In order to organize the mixing time, temperature, and quantity, 25 different mixtures were prepared.
However, the amount of hardening depends on a number of factors such temperature, mixing time, bitumen film thickness, etc.
The technology enables producers to better understand and optimize mixing time, batch sequencing, and mix designs.
This mafia have hired large godowns in the city where they are preparing the toxic milk by mixing time barred power milk with the water in drums and supply it to the citizens in the name of pure milk.
Both mixing time and speed are variable, input via an HMI mounted on the machine.
Mixing time for a full tank is 60 seconds; viscosity drilling fluid takes approximately six minutes.
These ring-pan intensive mixers are equipped with a mechanical agitator and attain extremely high qualities of concrete in a short mixing time.