mixing valve

mixing valve

[′mik·siŋ ‚valv]
(engineering)
Multi-inlet valve used to mix two or more fluid intakes to give a mixed product of desired composition.

mixing valve

A valve which mixes liquids, by either automatic or manual regulation.
Mentioned in ?
References in periodicals archive ?
The 420-T Series combines durability, water-saving design and TempShield scald protection that eliminates a separate thermostatic mixing valve below the sink.
The family's lawyer said the hotel failed in their duty of care by not having fitted the shower with a thermostatic mixing valve.
The new products extend beyond ThermOmegaTech's flagship washdown station, STVM[R], which delivers a high temperature washdown using a proprietary mixing valve that combines steam and water for a constant stream of water at a set temperature, broadening the company's ability to accommodate new markets.
Downsizing to a smaller unit and adding a thermostatic mixing valve may be a great way to overcome space constraints.
Have a licensed plumber install a mixing valve and raise the water heater tank temperature to 140 degrees Fahrenheit, which will prevent the growth of bacteria.
The DHW demand was tempered with a typical mixing valve supplied with hot water from the DHW tank and cold water from city water supply.
Since the water inside the tank can reach 212[degrees]F with maximum daily sunlight, it is always necessary to install a tempering or mixing valve, or some other type of heat dump, such as running the lines a distance underground, to cool down the water before it reaches household plumbing.
To temper the water down to more usable range a mixing valve is installed in between the hot water and the cold water pipe.
I was replacing our shower fixture, and I couldn't budge the large brass nut that was holding the two-way mixing valve in place.
The easy to access inline filter and thermostatic mixing valve can then be serviced quickly and easily away from the site with minimal disruption.
Can I just put a tee in the cooling line with a 2 gpm pump designed for hot water that goes to a mixing valve at the sprayer?
A domestic hot water coil, heating mixing valve and an immersion back-up heater are all factory fitted as standard.