panel length

panel length

[′pan·əl ‚leŋkth]
(civil engineering)
The distance between adjacent joints on a truss, measured along the upper or lower chord.

panel length

In a truss, the distance between two adjacent joints along either the upper or the lower chord.
References in periodicals archive ?
The study investigated the relative improvement in drag-reduction for several boat-tail configurations, considering the effects of panel angle, panel length, side coverage, and the influence of a lower panel.
The project incorporates more than three kilometres of panel length, with approximately 370 wall panels.
donning a reversibly foreshortened absorbent article in a pre-application state, the absorbent article comprising front region and a back region separated by a crotch, and comprising side panels, wherein in the pre-application state the absorbent article comprises a furled continuous belt formed by the side panels and the front and back regions of the absorbent article, wherein the furled continuous belt comprises multiple rolls, wherein the side panels have a pre-application side panel length, Li, and a post-application side panel length, Lf, wherein Li, is less than Lf; and b.
Slide rails come in several variations: four-sided systems have one panel length on all sides tied together by corner posts.
Parallel referred to joint specimens loaded in the direction parallel to the fastening member face strand orientation, which is the full-size panel length direction.
Special tooling enables Centria to adjust panel length in 0.
Figure out a uniform panel length for your longest blank wall first--then designate that length as your basic panel dimension.
The next step is in determining the: cut, match, panel face match, figure, square footage, panel length required, leaf width, core material and thickness, AWI grade of panel, the back veneer species, and whether the panel is to be sanded or finished by MVP.
5 percent of the panel length, well within the one percent specification.
Each orebody is accessed from the hanging wall, starting at a point that divides the 120-m panel length into 45- and 75-m sections.
Tenders are invited for Weld Mesh System, Unico Panel Length 2470Mm, Height 2460Mm, Mesh Size 50Mm X 200Mm, Wire Dia 4.