peripheral speed

peripheral speed

[pə′rif·ə·rəl ¦spēd]
(mechanical engineering)
References in periodicals archive ?
With the increase in the seed density rate, and consequently the peripheral speed of the seed meter disc, there is an increase in the multiple spacings percentage, specifically for T2, T5 and T6, but it was not linear for T4 conductor.
74 sqm and with an innovative geometry that allows to reach high production levels with low peripheral speed of the main cylinder for lower stress on the fibers and less wear of the carding flats.
For RPVC extruders, the maximum screw speed is often set in the range of 25-35 ft/min peripheral speed, measured at the screw O.
the possibility arises, the peripheral speed of copper
The gap between the horseshoe hammers and the anvil ring is adjustable and the peripheral speed of the rotor is variable, making the BHS rotor impact mill flexible for use in a wide range of applications.
The cylinders accelerate and decelerate during each revolution such that the peripheral speed of the blades and the speed of the web are equal at the cutting point, which the company says will maintain sheet length accuracy and squareness.
Churning losses are relatively independent of the nature of the gears and the gear ratios - they are primarily related to the peripheral speed of the gears passing through the fluid.
The peripheral speed v represents the product of vibration amplitude and the frequency co of the vibrating grinding tube:
By adjusting the peripheral speed of the ribbon, you can "tune" the blender to reach the greatest possible efficiency for each product.
With milling, this is the peripheral speed of the cutter acting on a stationary workpiece.
The mixing elements are arranged at intervals on the mixer shaft and their size, number, arrangement, geometric shape and peripheral speed are designed to force the product into appropriate components of axial and radial motion.
The performance of a bead mill is related to a number of factors such as selecting the proper grinding bead, operating at the correct disc peripheral speed and finding the right feed pump rate.

Full browser ?