Briefly, ABTS solution (7 mM) was reacted with potassium persulfate
This method is more efficient than the previously described microwave method using potassium persulfate
as oxidising agent in conc.
(KPS) and sodium bicarbonate (NaHC[O.
Homogeneous and heterogeneous AOPs for rapid degradation of Triton X-100 in aqueous media via UV light, nano titania hydrogen peroxide and potassium persulfate
In fact, we took advantage of potassium persulfate
as the oxidizing agent to bypass the need for acids or inorganic solvents.
The stock ABTS + solution was prepared by mixing ABTS and potassium persulfate
solutions followed by dilution with distilled water until the absorbance at 735 nm was approximately 0.
Prior to analysis, samples were further digested in sulfuric acid, nitric acid, potassium persulfate
, and potassium permanganate by heating to 95 [degrees]C for one h.
The example is a cyan pigment, octadecyl acrylate, and styrene with a potassium persulfate
Ammonium and potassium persulfate
are commonly used as the active ingredients in powdered bleaches.
Thus, subsequent polymerization was conducted using potassium persulfate
(PPS) as initiator to prepare polystyrene/montmorillonite core-shell particles via Pickering emulsion polymerization, where the styrene drops acted as a core and the montmorillonite nanoplatelets covering the drops surface as a shell (Fig.
In all cases, the total mass of the reacting medium was equal to 90 g, obtained after adding 30 g of an aqueous solution of potassium persulfate
(initiator) to 60 g of an aqueous solution of the remaining reagents with the desired compositions.
Styrene (St), n-butyl acrylate (BA), potassium persulfate