From that, we can see the radial stress
of arterial wall is compress stress.
To find the elastic modulus, we must determine the sectional area of the samples at each moment during the whole period of force exertion and obtain the radial stress
for various radial strains.
An observation of the nodal path (N1, N2, N3, N4) in respect to its radial stress
was analyzed (Table 1, Figure 3).
The study concluded that the radial stress
increases not far from the pile end.
As strain increased, position effect causes the diameter of PVB increased and the radial stress
The equation (6) represents radial stress
distribution in the blank at die corner during the drawing process
The piston is roller-guided and is no longer subjected to rod thrust so there is no piston radial stress
or piston slap," says Rabhi.
On putting the value of (36) in (20) and (21), one gets the expression for the dimensionless radial stress
contours, upon inserting the dynamic seal in the plastic housing, indicate the level of sealing; contours reaching the 9 MPa (1,300 psi) are read.
The radial stress
decreases along the radius and vanishes at the rod surface, as required by the traction-free boundary condition.
The Three flange stresses are acted on flange are longitudinal hub stress, Radial stress
, and Tangential stress.
Hence, non-dimensional radial displacement, radial stress
and circumferential stress are found as follows: