shut height

shut height

[′shət ‚hīt]
(mechanical engineering)
The distance in a press between the bottom of the slide and the top of the bed, indicating the maximum die height that can be accommodated.
References in periodicals archive ?
TM-4000 Universal Crimp Press System Shut Height - 135.
The DIRECT-AIRE Mini is offered standard with an EZ-Dial pressure regulator, adjustable dwell timer, adjustable shut height and 2-hand anti-tie down Actuator.
But flat panels and molds with small shut height (thickness) must be farther away from head tooling due to parison arching angles back to the head tooling.
Regardless, the press shut height should be calibrated to a standard.
The molding press for the new system is a 4000-ton vertical compression press that boasts 124 inches of daylight, a 112-inch stroke, and a minimum shut height of 12 inches.
Standardizing the shut height for all dies used in a given press is desirable because the shut height remains constant, and because it can be done with the machine running.
Parameters to set include press shut height, counterbalance pressure, die-cushion pressure, hydraulic overload, tonnage monitoring, signature analysis and die sensing.
It offers a small footprint, a shut height of 10-14" (254-355 mm), and a maximum trigger bar of 49.
Throat Depth 200 Mm, Shut Height 200 Mm, Stroke Adjust 0-45 Mm, Motor 1.
Nonetheless, the new machine is reportedly compact and has a shut height of 10 to 14 in, It uses a vertical injection unit and has fewer parts, resulting in less maintenance.
Tenders are invited for Supply of locks as per specification spec: make: godrej or globe size of lock : 65 mm shackle shut height : 21 mm shackle diameter : 9.
I'll take shut height, front-to-back measurements, and strokes per minutes.