Single-ended configuration | Article about single-ended configuration by The Free Dictionary
differential signaling (redirected from single-ended configuration)
differential signalingUsing two wires for each electrical path for high immunity to noise and crosstalk. The signals are sent down one wire as positive and the other as negative, and the circuit at the receiving end derives the signal from the difference between the two.
Differential Vs. Single-Ended
Differential signaling is superior to single-ended signaling, where the reference voltage is ground and can vary over long distances. In differential signaling, the reference voltage is controlled. Typically, twisted pairs are used so that external radiation impacts both wires at the same place, and the noise can be detected more easily. See LVDS and SCSI.
References in periodicals archive
Some manufacturers' dual-mode LED tubes require the fixture to be rewired to a single-ended configuration
, thus eliminating the shock hazard from their tubes.
Continuous signal-to-ground coupling allows NeXLev to achieve electrical performance of less than 5% multi-line crosstalk with less than 5% reflection at 250 ps in the single-ended configuration
, or less than 150 ps for the differential-pair version.
The ML4877 and ML4878 power fluorescent lamps with a differential-drive configuration instead of the conventional single-ended configuration
Both differential and single-ended configurations
were used appropriately.