solution heat treatment

solution heat treatment

[sə′lü·shən ′hēt ‚trēt·mənt]
(metallurgy)
Heating and holding an alloy at a temperature at which one (or more) constituent enters into solid solution, then cooling the alloy rapidly to prevent the constituent from precipitating.
Mentioned in ?
References in periodicals archive ?
Tenders Are Invited For Solution Heat Treatment Lpg Furnace (Capacity:12 Ton) With Quenching Facility Qty 01 No
2) In the absence of P, the coarsening of eutectic Si during solution heat treatment may occur by simultaneous dissolution of the fine particles (Oswald ripening mechanism) and collision of the nearby particles.
Solution Heat Treatment and Aping Target Temperature Solution heat treatment (T4) Time (hours) Temperature (C) 00:00 25 01:00 480 00:30 495 02:00 495 00:30 528 14:00 528 - Water quenching at 65C Aginq (T7) 00:00 25 00:30 200 04:00 200 - Air cooling Table 3.
The furnaces were ordered to meet a growing need for accurately controlled diffusion and solution heat treatment of turbine blades and nozzle guide vanes at the Aberdeen headquarters.
Therefore, the mechanical properties of 990 gold were investigated after the metal was subjected to various combinations of solution heat treatment and quenching, age hardening, and cold working.
After specifying the alloy chemical composition, solidification process, and heat treatment parameters, the model predicts the microstructure and potential defects through various stages of the component lifecycle: casting, solid solution heat treatment, and artificial aging.
Tenders are invited for Solution Heat Treatment Lpg Furnace Capacity 12 Ton With Quenching Facility Qty 1 No
Tenders are invited for Cage For Wellman Solution Heat Treatment Furnace As Per Drg.
Solution heat treatment at 1,000F (538C) for 12 hours, then quench in hot water (150-212F/66-100C).
Tenders are invited for 1) Cage No-1(6 Metres Long)For Solution Heat Treatment (2)Cage No-2(4 Metres Long)For Solution Heat Treatment (3)Chain For Solution Heat Treatment Furnaces.
A: The American Foundry Society's book Aluminum Casting Technology recommends a temperature of 1,000F (538C) for 12 hours for T6 solution heat treatment and 650F (343C) for two hours for annealing.
The researchers conducted studies to produce comprehensive data on the effects of solution heat treatment and aging on the strength and quality of 354 castings.

Full browser ?