striker plate

striker plate

[′strī·kər ‚plāt]
(ordnance)
A plate in the breech of a firearm or gun, which supports the base of the cartridge and which is pierced with a hole through which the striker or firing pin hits the primer.
References in periodicals archive ?
Tenders are invited for Supply of steel body with scratch resistant powder coated finish night latch 7 lever (rim lock) full set consisting of latch assembly, round lock assembly, lock plate, striker plate, 3 nos keys and 15 nos screws for inside opening doors with safety feature like brass lever locking mechanism, safety catch etc all technically including shape and size similar to the night latch of m/s.
The Dubai carrier confirmed that there was a "whistling noise emanating from one of the doors on the A380 upper deck" but said the sound from the door was caused by "a small dimensional difference between the inflated door seal and the door lower frame striker plate when the door is in the closed position.
Make sure locking latch engages striker plate before tightening screws
The bale cutter also incorporates a cast urethane blade striker plate.
By sliding the HandyBar into the existing U-shaped striker plate on a car's door frame, you create instant support for getting in and out.
An innovative locking cam system, ball bearing hard plate that prevents drilling out the lock, and frames surrounded by a 1/4-inch striker plate are just a few of the features that offer a Pendleton Safe more protection than any other.
An arrow kicking "into the riser" (over-spined) might be corrected by adding a thicker striker plate.
You can add security to the lock by replacing the screws in the striker plate with 2 1/2in wood screws.
Finally, hold the lock striker plate over the two mortices, mark the outline of the plate on the door jamb with a pencil, and cut a recess for the plate.
A zinc die striker plate is available to suit all options.
The company is said to be the first and only guillotine manufacturer to incorporate a cast urethane blade striker plate, according to the literature.
In certain vehicles the hood inner panel reinforcement where the hood latch striker plate is attached, may corrode and weaken the strength of the latch.