thermosetting resin


Also found in: Dictionary, Thesaurus.
Related to thermosetting resin: thermoplastic resin, Thermosetting plastic

thermosetting resin

[′thər·mə‚sed·iŋ ′rez·ən]
(materials)

thermosetting resin

A synthetic resin which assumes a permanent set under heat; cannot be remolded once the set has taken place.
References in periodicals archive ?
ASME NM-2 will provide requirements for the design, materials, manufacture, fabrication, installation, examination, and testing of glass-fiber-reinforced thermosetting resin piping systems.
In this paper, the cure of the RTM6 thermosetting resin was investigated using a thermocouple and an optical fiber Fresnel refractometer.
Woodceramics, which are made of wood or wood-based materials impregnated by thermosetting resins and then carbonized at a high temperature, are porous carbon materials, the properties of which vary according to manufacturing conditions.
Heat and steam then are injected into the pipe to activate the thermosetting resins, resulting in a new structural pipe inside the original pipe.
National Liner consists of a non-woven, needled polyester felt liner saturated with a thermosetting resin system designed specifically for the environmental conditions of the rehabilitation project.
Kotaki, Wang, and He have developed a conductive material consisting of a curable liquid thermosetting resin mixed with conductive nanofibers such as carbon nanotubes, carbon nanofibers, metallic nanofibers, or nonconductive nanofibers with an electrically conductive coating, plus a particulate filler.
It comprises a thermoplastic polyimide obtained by reacting a diamine component comprising a diamine represented by the following formula (1) with a tetracarboxylic acid dianhydride, and a thermosetting resin contained in the ratio of from 1 to 200 weight parts, based on 100 weight parts of the thermoplastic polyimide.
It employed a triazine compound, MCA, rather than traditional thermosetting resin or inorganic hydroxide as encapsulation material.
An abrasive article is provided that includes at least one binder system formed from a polymeric additive and a thermosetting resin.
The materials are available as copper-clad laminates or prepregs in a woven-fiberglass-reinforced, low polarity thermosetting resin system modified with a proprietary microdisperse ceramic.
The process uses a custom-manufactured non-woven felt tube impregnated with a polyester thermosetting resin.
However, cycle times for the production of car parts are much faster and the thermosetting resin must therefore cure in only a few minutes, not a few hours.