Setting up fixed telephone access, a mobile fleet of internet access to balanced and unbalanced output
Figure 3 shows the difference between an unbalanced output
filter and a balanced output filter.
The back of the CD-150B holds a pair of male XLR connectors for the balanced output, a pair of RCA jacks for the unbalanced output
and a lone RCA jack for the 75 ohm coax digital out.
Baluns, (1) which transform a balanced input transmission signal to unbalanced output
signals, are widely used in many wireless applications, such as balanced push-pull amplifiers, frequency doublers, (2) antenna feed networks (3) and double-balanced mixers.
The newer unit sports both balanced and unbalanced output
jacks, and the digital out is now a BNC connector rather than an RCA jack.
Contract are awarded for "Wireless Handheld Microphone Features Minimum AAAAWireless Handheld Transmitter Band Uhf (670-695 Mhz) Alacance up to 150 Feet out Xlr Balanced and Unbalanced Output
A-AA in Different Capacity Receiver with Select AAScanning Transmission Channels and the Best Selection of Frequency Automatic Transmission Must be Submitted in University City Building C3 Die "
The rear panel of the unit features (from left to right) a receptacle for the supplied IEC power cord; the on/off switch; balanced output jacks; unbalanced output
jacks; jack sets for tape monitoring and external processor; three jack sets for line-level unbalanced inputs; and balanced input jacks.
Destinations are AES67 talkback units, or rear panel balanced and unbalanced outputs
The Dacamp L1 transmits high-resolution analogue audio signals to a wide range of headphones via balanced or unbalanced outputs
Both balanced and unbalanced outputs
with fixed or variable volume are provided, together with a low-impendence headphone output.
Digital volume control enables usage as a standalone music playback device connected directly to a power amplifier or active loudspeakers without the need for a separate preamp, and selectable low-pass filtering enables the unbalanced outputs
to be used for subwoofer integration.
This allows designers to minimize the amount of external circuitry and avoid having to over-design or compensate for unbalanced outputs