Wet RFID inlay | Article about wet RFID inlay by The Free Dictionary
RFID inlay (redirected from wet RFID inlay)
RFID inlayThe RFID tag in a smart label. It comprises the chip and aluminum, copper or silver antenna bonded to a polyethylene terephthalate (PET) layer that is delivered to the label maker "dry" (without adhesive) or "wet" (attached to a pressure sensitive liner). The inlay is adhered to the back side of the label and printed and encoded in an RFID printer. See RFID tag, RFID reader, RFID printer and RFID.
|A Roll of Inlays|
|Inlays are delivered to the label maker in a roll such as these dual dipole "Frog" inlays from UPM Raflatac. They are adhered to the back of the smart label, which is then printed and encoded in an RFID printer. (Image courtesy of UPM Raflatac, www.raflatac.com)|