workhead

workhead

[′wərk‚hed]
(mechanical engineering)
Mentioned in ?
References in periodicals archive ?
The B-axis has a direct drive, as well; its workhead has a swivelling range of +61[degrees] to -91[degrees].
Because of the small diameter of its single piece dynamic workhead, the system can provide effective high shear mixing, even in vessels with narrow openings.
Swiss artist Philipp K lopfenstein airbrushed a bald eagle and American flag design on the machine, which has a Fa-nuc Oi control with Studer Pictogramming software; a 20" OD wheel for more abrasive with easy change-over; a 12 hp wheel drive; and an MT4 tailstock and MT5 workhead with 16 millionths runout for extreme accuracy, chucked or between centers.
In the Model 30, the air bearing workhead and wheelhead spindles are mounted together on a granite surface plate that floats on air, isolating the work from high and low frequency vibrations.
The new VSP Batch Mixer is specially designed to allow free flowing powders to be incorporated into liquids by feeding them from a hopper or vacuum wand through an eductor tube directly into the mixer's rotor/stator workhead.
offers the re-designed Saturn FKS 450-1HNFE grinder with the TKE 330 electronic workhead.
The ISO 50 universal workhead with Studer's infeed ring sensing is capable of both live spindle grinding and grinding between centers, and has a maximum speed of 1,500 rpm.
001[degrees] is installed directly on the workhead spindle.
The design of the machine makes it impossible for any materials - liquid or solid - to pass from the inlet to the outlet without being subjected to intense mechanical and hydraulic shear as they pass through the workhead.
The design makes it impossible for any materials--liquid or solid--to pass from the inlet to the outlet without being subjected to intense mechanical and hydraulic shear as they pass through the workhead.
The rotary axis for the workhead is powered by a Fanuc servo motor or by a Fanuc synchronous built-in DiS servo torque motor with a high-accuracy rotary encoder.
The dresser is mounted on the workhead spindle to maximize stiffness and facilitate the minimum practical removal of CBN from the wheel during dressing.