decanol

(redirected from 1-Decanol)
Also found in: Wikipedia.

decanol

[′dek·ə‚nȯl]
(organic chemistry)
Mentioned in ?
References in periodicals archive ?
Starting with pure component alkanes and alcohols such as n-dodecane, n-heptane and 1-decanol, the effect of ignitability and oxygen content especially on soot emissions was identified.
Structure 1 1-Hexanol 111-27-3 [FORMULA NOT REPRODUCIBLE IN ASCII] 2 1-Heptanol 111-70-6 [FORMULA NOT REPRODUCIBLE IN ASCII] Source 1-Octanol 111-87-5 [FORMULA NOT REPRODUCIBLE IN ASCII] 3 1-Nonanol 143-08-8 [FORMULA NOT REPRODUCIBLE IN ASCII] 4 1-Decanol 112-30-1 [FORMULA NOT REPRODUCIBLE IN ASCII] 5 1-Undecanol 112-42-5 [FORMULA NOT REPRODUCIBLE IN ASCII] Source 1-Dodecanol 112-53-8 [FORMULA NOT REPRODUCIBLE IN ASCII] 6 1-Tridecanol 112-70-9 [FORMULA NOT REPRODUCIBLE IN ASCII] Figure 4.
Se utilizo acido lactico Carlo Erba al 88%, octoato de estano y cloruro de estano Aldrich, cloroformo, diclorometano, acetona, acetato de etilo, 1-Butanol, 1-Octanol, 1-Decanol y metanol grado analitico de Merck, [epsilon]-Caprolactona Alfa Aesar destilada previamente.
M] que es mas evidente en la mezcla del halo-alcano con 1-decanol [12].
En este grupo se consideran 4 sistemas binarios: 1-decanol con los isomeros aromaticos [C.
La funcion A-B reporta el peor ajuste para muchos de los sistemas investigados; no obstante es la funcion mas util para predecir el volumen de exceso molar de mezclas binarias con comportamiento muy cercano al ideal como las mezclas acetonitrilo + (2-propanol, 2-butanol y 2-pentanol) y 1-decanol + (o-xileno, m-xileno, p-xileno y etilbenceno) que no se predicen adecuadamente con las otras funciones.
0 fold in presence of hexane, 1-decanol, isooctane, n-dodecane, and n-tetradecane respectively (19).
Chloride-selective electrodes were based on the ion-exchanger methyltricapryl ammonium ion (Corning #477315, Midland, MI) dissolved in 1-decanol (ion-exchanger courtesy of Dr.
On the other hand, MD3 and 1-decanol did not show any initial foam even at a very high rate of air injection.
On the other hand, MD3 and 1-decanol did not show any initial foam, even at a very high rate of air injection.
TABLE 18 GLOBAL renewable 1-decanol MARKET, by geography 2007 - 2014 ($thousands)