The maximum adsorption ratio
of the nanocomposite was obtained at 50 mg/g with aniline composition of 5 wt%.
Combined with (2), (3), and (4), the adsorption ratio
is accessible to obtain as
The adsorption ratio
of MB decreased with the increase of temperature, indicating that the adsorption of MB by MC/CABs was an exothermic process.
Similarly, a potassium adsorption ratio
(PAR) has been defined with K concentration replacing that of Na (U.S.
Table 7: Results of experiments sodium adsorption ratio
and electrical conductivity.
If a further reduction in charcoal dosage is desired, increasing the boiling time can be an option since the adsorption ratio
should increase in a long time.
Magnesium adsorption ratio
(MAR) was calculated according to Raghunath (1987).
The physicochemical parameters measured during the present study included essential metals (Ca, K, Mg and Na), pH, temperature (T), dissolved oxygen (DO), total alkalinity (TA), electrical conductivity (EC), total dissolved solids (TDS), total hardness (TH), chloride (Cl-), bicarbonate (HCO[?]), residual sodium bicarbonate (RSBC), sodium adsorption ratio
(SAR), percent sodium (PS), Kelly's ratio (KR), magnesium adsorption ratio
(MAR) and permeability index (PI).
Sodium adsorption ratio
(SAR) and exchangeable sodium percentage (ESP) are currently used as indices for assessing soil structural stability on interaction with water.
U.S Salinity laboratory diagram  (Figs 4a and 4b) based on sodium Adsorption Ratio
(SAR) vis a vis specific conductance values, the two most significant parameters of sodium and salinity hazards indicate suitability for agricultural purposes.
"We've found several spots that have a sodium adsorption ratio
, or SAR, of higher than 15," says Shouse.
The last chart presents the C[O.sub.2] adsorption ratio
through the process of photosynthesis depending on the total C[O.sub.2].