band-stop filter

(redirected from Band-stop)

band-stop filter

See filter.

band-stop filter

[′band ‚stäp‚fil·tər]
(electronics)
An electric filter which transmits more or less uniformly at all frequencies of interest except for a band within which frequency components are largely attenuated. Also known as band-elimination filter; band-rejection filter.
References in periodicals archive ?
In addition, Phase Lock Loop (PLL) and a band-stop filter are designed to lock the grid voltage phase and reduce harmonics.
Moreover double-layer should provide a narrower band-stop filter.
Ultra-Wideband Small Rectangular Slot Antenna with Variable Band-Stop Function.
Low-pass, high-pass, band-pass and band-stop filter types with 12db or 24db slope will be offered by FilterSolo.
Therefore, the proposed modified CLL resonator can result in triple band-stop performance when placed next to the feed line and it can be equivalent to three shunt-connected series LC resonance circuits as shown in Figure 8.
When compared to band pass filters, the band-stop filters exhibit lower pass band insertion losses, which minimizes the degradation of the receiver's noise figure, while providing a high rejection level in removing spurious signals.
2 The transformation from simulative low pass to simulative band-stop
In [12], a microstrip band-stop filter with parallel coupled lines is constructed, but the return loss of upper passband is bad and its size is big.
3 deals with the transmission of EM waves through a band-stop filter around the DGS-resonance; but in Fig.
Filter-design software packages can frequently design some or all low-pass, high-pass, band-pass, band-stop (notch), and all-pass type filters.
Chapter 6 discusses some typical microstrip high pass and band-stop filters.