This computer impingement study quantified the 3-D motion profile and the locations of prosthesis impingement for three glenospheres sizes when the glenoid
baseplate cage peg is positioned in the center of the glenoid and subsequently inferiorly shifted by 2 mm and 4 mm.
A displacement test was conducted according to a previously presented test method (9,11-12) and used to quantify glenoid fixation of six different rTSA designs: 38 mm Equinoxe standard offset (EQ), 38 mm Equinoxe lateral offset (EQL), 36 mm Depuy Delta III (DRS), 36 mm Zimmer, (ZRS), 32 mm neutral DJO RSP (DJO), and a 36 mm DePuy Delta III with 29 x 10 mm of bone-substitute "graft" behind the
baseplate (BIO-RSA).
Quantify the amount of cortical and cancellous glenoid
baseplate surface contact with three different rTSA prostheses when implanted with and without inferior tilt and when implanted in a 10 mm medially eroded glenoid.
To install the correct sight mount
baseplate, field-strip the Q4 TAC and then remove the two hex-socket screws on top of the slide.
M2 EQUITYBITES-April 3, 2018-Zimmer Biomet announces first surgery with US FDA cleared Comprehensive Augmented
Baseplate for shoulder reconstruction
M2 PHARMA-April 3, 2018-Zimmer Biomet announces first surgery with US FDA cleared Comprehensive Augmented
Baseplate for shoulder reconstruction
(1-16) These investigators report different strategies for dealing with various amounts of bone loss including altered
baseplate positioning, the use of augmented components, and bone grafting techniques.
The atypical architecture of this design required the creation of two separate
baseplates. The first, or 'peripheral'
baseplate, is fixed to the case and supports the tensioner mechanisms.
These mags also incorporate color-coded followers and
baseplate release buttons.
The pistol comes with two magazines: a 12-rounder with a finger-hook
baseplate installed and a flush
baseplate in the case and a 17-round magazine from the full-size model with a polymer grip extension you can choose to install or not.
In metal chassis format with a
baseplate for conduction cooling, the DAx and DBx series can be used with a
baseplate operating temperature range of -40 to over 100 degrees Celsius.
They stressed that the weight and stiffness of the vibrator
baseplate played a big role in extension of the vibrator output force bandwidth towards 200 Hz.