The accuracy of flux-linkage stabilization is determined by the spread of the curves of its modulus of transient processes, and the stability reserves by amplitude and phase--according to the Bode diagram
at various random variations of the undefined parameters of the regulator k, [k.sub.1], [k.sub.2], [k.sub.3], [T.sub.1], [T.sub.2] and the object [K.sub.fc], [R.sub.1eq], [R.sub.2], [L.sub.1], [L.sub.2], [L.sub.12] within specified boundaries.
However, again from the Bode diagram
in its phase angle format, the presence of three time constants is observed.
Figure 9 shows the open loop Bode diagram
of tracking loop with and without the lag compensation.
The bode diagram
of VR controller is shown in Figure 2 for [K.sub.ph] = 1, [K.sub.ih] = 50, h = 6, [[omega].sub.s] = 100[pi].
Stability analysis is performed on the Bode diagram
by passing to frequency domain.
A common way of representing this is with a Bode diagram
According to the transfer function, we can obtain the BODE diagram
of the relief valve in the initial conditions (i.e., 0 m ocean depth, fitting clearance without deformation) shown in Figure 7.
The Bode diagram
of this model is shown in Figure 2.
According to (15) and (20)-(21), the bode diagram
of phase compensator is illustrated in Figure 12.
Figure 9 (b), AC impedance Bode diagram
, from the impedance of the Bode diagram
can be seen at the low frequency end, with the increase of pH impedance value decreases, and in acidic medium, the impedance values decreasing.
It is said that analysis of the Bode diagram
is simpler than the Nyquist diagrams.
for carbon steel exposed to a C[O.sub.2]-saturated (3% NaCl + diesel) solution at 50[degrees]C is shown in Figure 3.