bull gear


Also found in: Wikipedia.

bull gear

[′bu̇l ‚gir]
(design engineering)
A bull wheel with gear teeth.
References in periodicals archive ?
The bull pinion and bull gear are also enclosed in an oil-tight case.
Thrust loads from impellers and gears should be absorbed by individual thrust bearings on pinions, or transmitted to the bull-gear thrust bearing by means of thrust rider rings fixed to the pinions and bull gear.
Maintenance is easier on the C800 air compressor with a one-piece removable inducer, in-place roddable coolers, bull gear inspection ports, and open cooler casing which offer increased access to critical components.
In the commercial, the title of which was "Red Bull: Awaken the Grotto," the Austrian energy drink company had Dutch wakeboarder Duncan Zuur, clad in Red Bull gear, perform stunts inside the grotto, never before done in the cave.
The Centac 750 has only four moving parts--a bull gear and three rotating impeller assemblies--and does not need an annual overhaul, unlike standard three-stage reciprocating compressors, which have many mechanical parts like pistons and running gears.
To ensure efficient power-to-ground transfer, AGCO said, the cast-iron axle housings, designed by Iseki, have been coupled to the transmission and internally assembled with bull gear final drives.
Therein lay the problem: Over time, the dragline hoist drum bull gear had worn a 1/4" into the 22" diameter hoist drum shaft, which is 22' long.
The Bull Gear program is currently available online at www.
A bull gear provides automatic tonnage adjustment for fast mold changes and accurate tonnage setup.
and consist of a brush type rare earth permanent magnet motor, a conventional spur geartrain, two bull gear / jackscrew combinations coupled together by a single spur gear, two drive nut/moveable output rams, and a feedback Rotary Variable Differential Transformer (RVDT).
Tenders are invited for Bull Gear Wds6 Forging Proof Machined To Drg.
If solid rather than split bearings had been used, the customer would have had to disassemble the bull gear unit (i.