carrier wave
(redirected from Carrier-wave)Also found in: Dictionary, Thesaurus.
modulation
, in communications
modulation, in communications, process in which some characteristic of a wave (the carrier wave) is made to vary in accordance with an information-bearing signal wave (the modulating wave); demodulation is the process by which the original signal is recovered from the wave produced by modulation. The original, unmodulated wave may be of any kind, such as sound or, most often, electromagnetic radiation, including optical waves. The carrier wave can be a direct current, an alternating current, or a pulse chain. In modulation, it is processed in such a way that its amplitude, frequency, or some other property varies.
Amplitude Modulation
Amplitude modulation (AM) is the modulation method used in the AM radio broadcast band. In this system the intensity, or amplitude, of the carrier wave varies in accordance with the modulating signal. When the carrier is thus modulated, a fraction of the power is converted to sidebands extending above and below the carrier frequency by an amount equal to the highest modulating frequency. If the modulated carrier is rectified (see rectifier) and the carrier frequency filtered out, the modulating signal can be recovered. This form of modulation is not a very efficient way to send information; the power required is relatively large because the carrier, which contains no information, is sent along with the information.
In a variant of amplitude modulation, called single sideband modulation (SSB), the modulated signal contains only one sideband and no carrier. The information can be demodulated only if the carrier is used as a reference. This is normally accomplished by generating a wave in the receiver at the carrier frequency. SSB modulation is used for long-distance telephony (such as in the amateur radio bands) and telegraphy over land and submarine cables.
Frequency and Phase Modulation
In frequency modulation (FM), the frequency of the carrier wave is varied in such a way that the change in frequency at any instant is proportional to another signal that varies with time. Its principal application is also in radio, where it offers increased noise immunity and decreased distortion over the AM transmissions at the expense of greatly increased bandwidth. The FM band has become the choice of music listeners because of its low-noise, wide-bandwidth qualities; it is also used for the audio portion of a television broadcast.
Digital radio is based on frequency division multiplexing (FDM), which allows transmission of multiple signals simultaneously over a single transmission path, such as a cable or wireless system. Each signal travels within its own unique frequency range (carrier), which is modulated by the data (audio, video, etc.). Orthogonal frequency-division multiplexing (OFDM) takes this concept further, separating an individual transmission into multiple low-frequency signals with a high resistance to interference. A further extension of the technology, coded orthogonal frequency-division multiplexing (COFDM), is widely used in Europe and elsewhere where the digital audio broadcast (DAB) standard has been adopted. OFDM and COFDM offer the benefits of high spectral efficiency, resilience to radio-frequency (RF) interference, and lower multipath distortion.
Phase modulation, like frequency modulation, is a form of angle modulation (so called because the angle of the sinewave carrier is changed by the modulating wave). The two methods are very similar in the sense that any attempt to shift the frequency or phase is accomplished by a change in the other.