corrosion inhibitor

(redirected from Corrosion inhibitors)

corrosion inhibitor

[kə′rōzh·ən in‚hib·əd·ər]
(physical chemistry)
A compound or material deposited as a film on a metal surface that either provides physical protection against corrosive attack or reduces the open-circuit potential difference between local anodes and cathodes and increases the polarization of the former.

corrosion inhibitor

Any of a number of materials used to prevent the oxidation of metals; may be a coating applied to the surface, a paint undercoat, or an element alloyed with the metal.
References in periodicals archive ?
M2 PRESSWIRE-August 16, 2019-: Volatile Corrosion Inhibitors Market Analysis 2013-2028; By Type ( VCI Paper, VCI Film, VCI Liquid, VCI Powder) By Application ( Metallurgy, Aerospace, Automotive, Oil, Gas ); Radiant Insights, Inc
corrosion inhibitor helamin 9012 for corrective treatment of the heat carrier of high-pressure boilers.
It contains contact corrosion inhibitors that eliminate in-can corrosion, inhibit flash rust, and provide long term protection to the metal substrate.
Inspired by technologies used in life sciences, CoMic is an on-site chemical monitoring technology used to maintain asset integrity through delivering effective corrosion management, by informing management of corrosion inhibitors and providing data on the optimal level of corrosion inhibitor.
The region's corrosion inhibitors market is expected to show significant growth over the next few years, owing to rising metal processing, power generation, and construction sector.
Migrating corrosion inhibitors have been added to the single-component ChemSpeed 75 and ChemSpeed 75 ES (Extended Set) mortars, each suiting 0.50-in.
Ceramisphere is looking forward to showing the participants of ACS 2018 what our new controlled-release corrosion inhibitors can do and how it can help them in their formulation and provide them with a key competitive edge.
Hitherto, good results have been obtained in the research of nitrogen corrosion inhibitors, but few reports have described the mechanism of action between phosphorus corrosion inhibitors and metal surfaces.
Synthesis of Corrosion Inhibitors. The Monoterpenic Thiosemicarbazones (5-7) were prepared according to the reported reaction in Figure 1 [19-21].
Despite the continuous advances in the field of materials with corrosion resistance, the use of corrosion inhibitors is one of the most practical and economical ways to control it [1, 2].
Aerocron 2100 Electrocoat Primer achieves the benefits of an automotive electrocoat at temperature limits required by the aerospace industry, all while protecting workers and the environment with proprietary non-chrome corrosion inhibitors. The electrocoat process provides consistent film thicknesses and improved paint coverage on complex parts.
But, in such aggressiveness of acidic media, the most effective method for the protection of many metals against such acid attack is the use of corrosion inhibitors [2-4].

Full browser ?