D-ring

(redirected from D-shackle)

D-ring

D-ring
i. A D-shaped metallic ring for deploying a personal parachute. It is located on the left side at the breast level, permitting it to be pulled by the right hand without much difficulty. Also known as a ripcord handle.
ii. In parachuting terms, D-rings are two steel rings sewn to the front of the harness for attaching the reserve chute.
Mentioned in ?
References in periodicals archive ?
Tenders invited for Wire rope slings, d-shackle and chain pulley blocks - as per annexure.
Bottom attachment options allow soft loop/2:1 tack line, snap shackle, or D-shackle attachment to the bow or sprit.
Tenders invited for Wire rope sling, turn buckle, d-shackle, web sling, manila rope and wire rope of eot cranes
Limited Tenders are invited for Supply of D-Shackle
Tenders are invited for D-Shackle With Screw Pin As Per Annextur.D-Shackle Should Made By Forging.Make-Ferreterro,Dhf,Mahima Industries.
Tenders are invited for Supply Of Gold Pin Anchor Joining D-Shackle Threaded Type
Tenders are invited for D-Shackle - 40 Ton Capacity Made From Alloy Steel, Gr.-80, With Test Certificate.
Tenders are invited for Portable Universal Gearless Pully And Lifting Machine Supplied With Telescopic Operating Handle 20 Mtr Length Or Wire Rope Fitted With D-Shackle Capacity 2.6 Ton Pulling And 1.6 Ton Lifting 12 Mmdia Steel Wire Rope Model Ht-13 Hytack Brand Rdso Part 1 Approved Confirming To Rdso Spec.
Tenders are invited for Ms Forged D-Shackle Set Of One Each 1 24 Mmx28mm,3.2 Tonne ,3/4 19 Mmx22mm,2 Ton ,5/8 16Mmx19mm,1.25 Tonne ,1/2 12Mmx14mm,0.75 Tonne Tested To 50 Percent Overload From Govt.
Tenders are invited for Forged Alloy Steel D-Shackle As Per Sketch And Specification
Tenders are invited for Heavy Duty Grade - 80, D-Shackle As Per Is-6132 Part Ii Of Capacity - 9.5 Ton, Body Dia - 27 Mm, Pin Dia - 31 Mm And Jaw Inside Width - 95 Mm And Jaw Depth - 125 Mm.