Excessive short term emissions limit
of the opacity limit (%)
The Environmental Protection Agency increased the maximum mercury emissions limit
for cement plants in 2010, based on an analysis of emissions produced by some of the best-controlled cement kilns in the country, said Marc A.
Seneca has actually requested that LRAPA lower our plant's hazardous air pollutant emissions limit
from the 17 tons per year allowed by the original permit to 6 tons per year under the modified permit.
In June 2008, a Fulton County judge ruled that Dynegy Energy's proposed plant should be regulated by the "best available control technology" emissions limit
for any pollutant subject to regulation under the federal Clean Air Act.
According to the paper, Nissley Vineyards' attorney Joel Burcat said that while Penn-Mar's minor emissions source permit claims the plant will remain under the 50-ton-per-year emissions limit
During the three-day period, Bernama said vehicles that exceed the 50 Hatridge Smoke Unit (HSU) emissions limit
could be fined up to 2,000 ringgits (about $500), with those that surpass 70 HSU to be banned from the roadways until repairs are made and the vehicle passes a Department of Environment (DOE) emissions test.
By re-designating all of the furnaces and fluxers controlled by this baghouse as a "new source SAPU," compliance can be demonstrated by testing the baghouse stack and using the "SAPU" emission averaging equation to establish the stack emissions limit
In the future, implementation of the specifications of Directive 2003/17/EC (Euro V) will result in an additional decrease of the permissible emissions limit
We are not going to stick to the present 20% emissions limit
Existing area source metalcasters with annual metal melt production of greater than 20,000 tons will have to comply with an emissions limit
for melting furnaces of 0.
In addition to the penalty, today s action extends the requirement that Total comply with a lower benzene emissions limit
for an additional two years.
This would be a way for facilities to make sure their processes are operating properly without having a specific emissions limit
on the different pieces of equipment.