GPIO


Also found in: Acronyms.

GPIO

(General-Purpose Input/Output) An I/O interface on circuit boards. The GPIO lines can be used to accept input or send output signals, which are determined by the board designer or system integrator.
References in periodicals archive ?
Additional accessories such as an adapter to convert the GPIO pins to an output for a bread-board can be purchased for easier configuration.
SurfaceInk, whose portfolio includes more than 400 shipped client products in the consumer electronics, medical device, and industrial markets, said it plans to use GPiO's component data as a resource for its new and existing clients.
Zilog's Digital UART provides separate programmable interrupts and interrupt lines for UART and GPIO notifications, so the controlling device does not have to poll the device for data.
Extending the GPIO would give simultaneous access to even more features of the processors peripherals.
The P620 is packed with a host of standard I/O interfaces, including four USB 2.0 ports, a CardBus interface (two type-II or one type-III device), two FireWire 1394-B ports (800Mbit/ sec), two serial ports, and 20 General Purpose I/O (GPIO) lines.
SiByte processors are designed for maximum I/O throughput, with three 10/100/1000 Ethernet MACs, a 32-bit/66MHz PCI host bridge, HyperTransport Host Bridge, SMBus, GPIO, flash interface, interrupts, and DMA all integrated onto the single chip.
A GPIO for machine control signals, such as triggers, shaft encoders, exposure control, and general input/output, which can be controlled alongside video stream reception, is also provided.
VRX Virtual Radio Mixers include advanced features like Lawo AutoMix hands-free program mixing, Autogain one-touch mic calibration, multiple programmable Snapshots, on-screen GPIO hotkeys, and even a suite of VST-based audio processing tools.
With a set of control interfaces (including SPI, UART and GPIO), plus support for Dante Device Protocol, packet bridging and AES67, Dante Broadway is capable of connecting an audio product into the ecosystem of Dante-enabled products.
Requiring only a single input, the DGD0506 half-bridge minimizes MCU GPIO pin count along with the design flexibility to program deadtime from 70ns to 420ns.
In terms of connectivity, the console's interfaces include 32 mic/line inputs, 32 line outputs, eight digital AES3 inputs, eight digital AES3 outputs, eight GPIO ports, one MADI (SFP) port, three Ravenna/AES67 channels, and a headphone jack.
The Pi 3 also comes with four USB ports, HDMI port, ethernet port, 40 GPIO pins, microSD card slot, VideoCore IV 3D graphics core, camera interface, display interface, combined 3.5mm audio jack and composite video.