# impedance

(redirected from Impedances)
Also found in: Dictionary, Thesaurus, Medical.
Related to Impedances: effective resistance

## impedance,

in electricity, measure in ohms of the degree to which an electric circuit resists the flow of electric current when a voltage is impressed across its terminals. Impedance is expressed as the ratio of the voltage impressed across a pair of terminals to the current flow between those terminals. When a circuit is supplied with steady direct current, the impedance equals the total resistanceresistance,
property of an electric conductor by which it opposes a flow of electricity and dissipates electrical energy away from the circuit, usually as heat. Optimum resistance is provided by a conductor that is long, small in cross section, and of a material that conducts
of the circuit. The resistance depends upon the number of electrons that are free to become part of the current and upon the difficulty that the electrons have in moving through the circuit. When a circuit is supplied with alternating current, the impedance is affected by the inductanceinductance,
quantity that measures the electromagnetic induction of an electric circuit component; it is a property of the component itself rather than of the circuit as a whole.
and capacitancecapacitance,
in electricity, capability of a body, system, circuit, or device for storing electric charge. Capacitance is expressed as the ratio of stored charge in coulombs to the impressed potential difference in volts.
in the circuit. When supplied with alternating current, elements of the circuit that contain inductance or capacitance build up voltages that act in opposition to the flow of current. This opposition is called reactance, and it must be combined with the resistance to find the impedance. The reactance produced by inductance is proportional to the frequency of the alternating current. The reactance produced by capacitance is inversely proportional to the frequency of the alternating current. In order for a source of electricity that has an internal impedance to transfer maximum power to a device that also has an impedance, the two impedances must be matched. For example, in the simple case of pure resistances, the resistance of the source must also equal the resistance of the device. Impedance matching is important in any electrical or electronic system in which power transfer must be maximized.

## impedance

[im′pēd·əns]
(electricity)
(physics)
The ratio of a sinusoidally varying quantity to a second quantity which measures the response of a physical system to the first, both being considered in complex notation; examples are electrical impedance, acoustic impedance, and mechanical impedance. Also known as complex impedance.
The ratio of the greatest magnitude of a sinusoidally varying quantity to the greatest magnitude of a second quantity which measures the response of a physical system to the first; equal to the magnitude of the quantity in the first definition.

## impedance

In alternating-current electric circuits, a quantitative measure of the opposition to the flow of current upon the application of voltage; measured in ohms.

## impedance

1. a measure of the opposition to the flow of an alternating current equal to the square root of the sum of the squares of the resistance and the reactance, expressed in ohms.
2. a component that offers impedance
3. the ratio of the sound pressure in a medium to the rate of alternating flow of the medium through a specified surface due to the sound wave.
4. the ratio of the mechanical force, acting in the direction of motion, to the velocity of the resulting vibration.

## impedance

(electronics, physics)
Opposition to flow of alternating current. Impedance consists of resistance plus reactance (capacitive or inductive). Measured in Ohms.

## impedance

(1) The opposition to the flow of alternating current in a circuit. Represented by the letter "Z" and measured in ohms, impedance is the combination of resistance, inductance and capacitance of the circuit. See ohm.

(2) The opposition that a speaker produces to the alternating current coming from an amplifier. The lower the impedance, the more power required. Most speakers have an impedance of four to eight ohms. See ohm.
References in periodicals archive ?
Covering a broad frequency range from 300kHz to 8000MHz, IDT s innovative Kz technology ensures the device delivers near-constant impedance (VSWR Syndigate.
Abstract Electrochemical impedance spectroscopy (EIS) is used to derive an expression for predicting the service life of organic coating in a C4-type environment (industrial and costal areas with moderate salinity) as defined in ISO 12944 standard for paints and varnishes--corrosion protection of steel structures by protective paint systems.
Impedance spectroscopy is an established method for the measurement of material properties in corrosion research, material interfaces, characterization of chemical processes, recently also in life sciences as biology, bioprocessing and medical diagnostics.
In the present study we have focused on the change of the impedance of porous ion exchanger because of adsorption of inorganic ions counter to the functional group of the ion exchanger.
This is the impedance a signal sees as it propagates down the line.
Therefore, as the mutual inductance gets larger (that is, as the trace gets closer to the plane and the characteristic impedances decrease), the overall loop inductance is reduced and the signal rise times get faster.
System reliability dictates that Flat-Zip cable should be replaced with Twisted pair cable for its better crosstalk and impedance characteristics.
The characteristic impedance (Zo) of a transmission line is one of two fundamental terms that fully describe it electrically; the other is time delay.
the traces are far apart, the odd-mode and even-mode impedances are of the same value.
As frequencies increase, so to does the demand for more precise impedance matching and higher-accuracy oscillation.

Site: Follow: Share:
Open / Close