Metal gutters

Metal gutters

A type of attached gutter, prefabricated of sheet metal; usually obtainable in two styles; either half round or given an ornamental profile resembling a cornice molding.
References in periodicals archive ?
Conservation works included a general cleaning of the church, replacement of metal gutters and downpipes, removal of existing plaster and repainting of stonewalls surfaces, repair of the stone belfry, replacing of damaged stones and conservation of frescoes.
It also can be used to lock down peeling paint on metal gutters and downspouts, concrete, PVC/plastic, plywood, brick, stucco, masonry, aluminum, aluminum siding, galvanized steel and fiberglass.
Polyvinyl chloride (PVC) is also used for gutters, but "can get brittle with age or in extreme cold" says Vandervort, and cannot carry as much snow load as metal gutters.
Polyvinyl chloride (PVC) is also used for gutters, but "can get brittle with age or in extreme cold," says Vandervort, and cannot carry as much snow load as metal gutters.
But just when you think it can't get worse, along come reports that metal thieves hit Willamette National Cemetery near Portland three times, stripping metal gutters and roofing from shelters used by families during military funerals.
If your metal gutters have developed a middle-age sag, it's time for a little tummy tuck.
Remove rust from metal gutters with a wire brush and paint the inside with bituminous paint.
Asphalt shingles cover the hip roof; metal gutters run around the perimeter of the post-and-beam structure.
Conservation works will include a general cleaning of the church, replacement of metal gutters and downpipes, removal of existing plaster and repointing of stonewalls surfaces, repair of the stone belfry, replacing of damaged stones and conservation of frescoes.
00 meters and is equipped with metal gutters and cornices of H2 safety barriers type of restraint anchored on concrete sleepers armed.
I set the ladder as vertical as possible to avoid denting my metal gutters and climbed up with the leaf blower in hand.
The Work includes, but is not limited to: Removal of existing failed or failing asphalt and membrane roofing, flashing, trim, fascia, underlayment, metal gutters, metal downspouts, anchors, rake boards, soffits, eaves and other related appurtenances.