The TF was located at (33.3%, Figure 1a) or posterior to (66.7%, Figure 1b) the
oblique line and below the superior tubercle in all nine sides.
Worldlines of particles at rest are vertical straight lines in a space-ct diagram, while particles moving at a constant velocity v are
oblique lines and accelerated particles are curved lines.
Leon et al reported in his study relation of foramen thyroideum to the
oblique line, the foramen thyroideum (FT) was found in a variable position: below (28 cases), right at the upper end (four cases), and above the
oblique line (nine cases).
Caption: FIGURE 5: Average bit numbers using different [k.sub.1] and [k.sub.2] for two-staged
oblique line equalization.
These areas were numbered as [6] 1 (retromolar trigon), 2 (
oblique line), 3 (alveolar process at level of the of 2nd molar), 4 (midbody at level of the 2nd molar), 5 (mandibular base at level of the 2nd molar), 6 (alveolar process at level of the 1st molar), 7 (midbody at level of the 1st molar), 8 (mandibular base at level of the 1st molar), 9 (alveolar process at level of the 2nd premolar), 10 (midbody at level of the 2nd premolar), 11 (mandibular base at level of the 2nd premolar), 12 (alveolar process at level of the 1st premolar), 13 (midbody at level of the 1st premolar), and 14 (mandibular base at level of the 1st premolar).
In each range bin of the range Doppler plane, the phase gradient appears as a
oblique line due to the azimuth motion.
In the mandibular angle region, this line indicates that a plate may be placed either along or just below the
oblique line of the mandible.
We see 3 lines on the XZ plane: a horizontal line, a vertical line, and an
oblique line. We can shift the horizontal and vertical lines to arbitrary positions and set up the
oblique line at an arbitrary angle.
and the task is to move the
oblique line until the sum of squares of the distances between the data points and the line is minimised.
Alan and Graham worked out the hardware and software combination to allow an electron beam system to draw
oblique lines. Incidentally, this idea for creating an
oblique line electron beam lithography system was worked out over a three-hour lunch in a pub in Melbourne!
Above the
oblique line are represented scores of similarity obtained from alignment and comparison of 49 sHD nucleotide sequences including 13 HDV-1 sequences, 7 HDV-2, 7 HDV-3, 6 HDV-4, 6 HDV-5, 4 HDV-6, 3 HDV-7, and 3 HDV-8.
Instrumentation will be highlighted, including an instrumented extrusion line, temperature sensors (thermocouples - fixed and mobile, resistance devices and infrared probes), pressure sensors (strain gauge and Piezoelectric), dimension sensors (lasers - profile, shadow and
oblique line, electromechanical, diode array, length and coating thickness), and weigh and area sensors (scales and radiation).