Plumbing Code

Plumbing Code

A building code regulating the design of plumbing systems.
References in periodicals archive ?
Without specific knowledge of plumbing code requirements, you'd be well advised to delegate the project to a qualified expert.
* (https://www.insurancejournal.com/news/southcentral/2019/06/03/528016.htm) Plumber Says 'Safety Is at Risk' After Texas Lawmakers Flush Plumbing Code
Further, the team learned that upcoming changes to the plumbing code have no provision for accommodating the kinds of changing societal needs that are the focus of this study.
Elsewhere, as in Pennsylvania, lead pipe was formally required by the plumbing code to the exclusion of alternatives.
The Philippines also needs a national plumbing code that will standardize piping sizes, maximum flush volumes, and maximum flow for shower heads, the technical expert said, adding that he was encouraged by the enthusiasm of Filipino policy makers he had met during his visit.
The proposals involved the International Existing Building Code, International Mechanical Code, and International Plumbing Code.
The system should comply with Alaska's plumbing code, wastewater discharge requirements, and other applicable regulations; it should be made with readily available and reasonably priced parts; and it should be ultimately acceptable for use by rural Alaska residents.
One exception was Texas, which received additional points because its contractor licensing and plumbing code adoption were inadvertently omitted in the original report.
The Illinois Plumbing Code required family living quarters to contain one lavatory and shower per unit.
The scheme, developed through consultation with regulators and industry leaders, presents suppliers of water fixtures with an opportunity to obtain voluntary certification of products that meet Abu Dhabi's Plumbing Code set by the Department of Municipal Affairs, and the Urban Planning Council's sustainability criteria Estidama.
For example, IAPMO writes the national plumbing code for solar heating systems, and works in close contact with the plumbing contractors and technicians that are key to the industry.
Several plumbing codes that have been adopted by many cities, including the Uniform Plumbing Code, 1991 edition; the Standard Plumbing Code, 1994 edition; and the International Plumbing Code, 1995 edition, require that the maximum delivery temperature of water in showers shall not exceed 120 degrees.