Poisson's Ratio

(redirected from Poisson's ratios)
Also found in: Dictionary.

Poisson’s Ratio


one of the physical quantities characterizing an elastic solid. It is equal to the ratio of the absolute value of the lateral strain to the absolute value of the longitudinal strain and was introduced by S. D. Poisson.

Suppose a rectangular parallelepiped is stretched in the direction of the x-axis (Figure 1). The parallelepiped undergoes an elongation of ∈x = (a1a)/a > 0 along this axis and a contraction of ∈y = (b1b)/b < 0 and ∈z = (c1c)/c < 0 along the perpendicular y-axis and z-axis, respectively—in other words, its lateral cross section shrinks. Poisson’s ratio is equal to vyx = ǀ∈y ǀ/ǀ∈x ǀor vzx = ǀ∈zǀ/ǀcǀ.

Figure 1

In the case of an isotropic solid, Poisson’s ratio remains invariant if tension is replaced by compression or if the strain axes are changed—that is, vxy = νyx = vzx = v. Poisson’s ratio for anisotropic bodies is a function of the direction of the axes—that is, νxyvyxvzx. Poisson’s ratio, together with one of the moduli of elasticity, determines all the elastic properties of an isotropic solid. For most metals, Poisson’s ratio is close to 0.3.

poisson’s ratio

In a material under tension or compression, the absolute value of the ratio of transverse strain to the corresponding longitudinal strain.
References in periodicals archive ?
Elastic material properties for the graphite and matrix used in the finite element analyses Modulus of Elasticity (GPa) Poisson's ratio Graphite 8.
Then some new scalar damage variables in terms of the reduction in the elastic modulus or elastic stiffness [4, 5], the shear modulus, the bulk modulus, and the Poisson's ratio [6] are proposed.
Key words: Petrographic characteristics, Uniaxial compressive strength, Ultrasonic wave velocities, Young's modulus, Poisson's Ratio.
where [epsilon] is the linear strain tensor, p is the pressure parameter, I is the identity tensor, [lambda] and [mu] are the Lame constants, related to the Young's modulus E and the Poisson's ratio v.
Taking advantage of these bizarrely large Poisson's ratios, Baughman, colleague Ali Aliev and others turned their sheets into giant muscles that contract like crazy when pulled just a tiny bit.
Material property used in analysis Modulus of layer, MPa Season Speed, AC AC AC base km/h surface binder August 30 1924 2365 2696 August 80 2944 3661 4413 November 30 14 307 15 872 15 244 November 80 17 541 18 975 18 154 Modulus of layer, MPa Season AC FR Subgrade subbase August August 345 69 45 November November Poisson's ratio Layer AC AC binder AC base surface Poisson's ratio 0.
Zhu (2003) also calculated Poisson's ratio from the tension and compression test results: in-plane Poisson's ratios [v.
First, the rough identification of material properties using a test specimen of random characteristics is performed; here only the approximate values of Poisson's ratios and shear module are ascertained.
This is due to the mismatch of transverse poisson's ratios of fiber and matrix materials.
Difference in Poisson's ratios of composite element symmetrically composed from different materials during compression increases the load-bearing capacity of whole element independently of signs of components Poisson's ratios by increment of stiffness [K.
Moreover, higher Poisson's ratios of insulate coating increase the maximum values of the equivalent stress in each phase and, in the particular case in which the insulated coating is composed of auxetic material with negative Poisson's ratio, the maximum equivalent stress significantly reduces in each phase.