RF filter

RF filter

(Radio Frequency filter) An analog circuit that detects and filters out a single carrier frequency, such as a radio or TV channel. RF filters are increasingly a major component in smartphones, which are required to tune into a dozen or more frequency bands. While the cost to the phone manufacturer for RF circuits in a modern smartphone is considerably less than the storage or display screen, it is nevertheless as much as 30 times that of the RF filters in the cellphones of the 1980s. See SAW filter.
Mentioned in ?
References in periodicals archive ?
Technavio's analysts forecast the global bulk acoustic wave (BAW) RF filter market to grow at a CAGR of 30.
The radio frequency components market is segmented on the basis of its components into five major categories, namely- RF filter (RX/TX FILTERS), duplexers, power amplifiers, antenna switches, and demodulators.
Filter Synthesis Using Genesys S/Filter provides a practical guide to Genesys software for filter design and is a recommendation for any engineering collection strong in microwave and RF filter mechanics.
Using Genesys, Sennheiser was able to: define and synthesise the high-order filter structure with layout implementation; import the actual RF filter layout and simulate with 3D planar EM simulation, via Momentum GX, to account for all layout interactions; perform EM-circuit co-simulation with circuit optimisation; and measure and verify the circuit against simulated design goals.
Our suggestion added another layer of air filtering material to the existing RF filter.
An LPF is a 2-port RF filter used in an RF signal path to pass a range of frequencies below a specified frequency and to suppress (attenuate) the frequencies above the high-side of a given range, the company added.
Varicap diodes (or varactors) are also a type of RF filter that is often utilized as voltage-controlled capacitors and is incorporated in TV tuners to electronically tune the receiver to different stations.
The tuner features an integrated low noise amplifier (LNA), programmable RF filter and an RF mixer providing real world performance.
Therefore, the frequency-multiplier and RF filter should be carefully designed and optimized to satisfy the specifications.
Along with the capacitors, inductors are used to provide RF filter tuning for the high frequency designs.
In this practical receiver system, the signal from the antenna is filtered by the Bessel, Butterworth, or Chebychev RF filter being considered for that simulation.